Measuring Replacement Slipper Springs For a 2018 Continental Model EC2K12-1200 Canoe/Kayak Trailer
Question:
I want to purchase new leaf springs for a 2018 Continental Model EC2K12-1200 Canoe/Kayak Trailer. I am lacking the knowledge of the proper measurement to take of the existing leaf springs. The existing is a 3 leaf spring. GVWR 1500lb Max Load 1200lb. Thank you for your help.
asked by: Jerry B
Helpful Expert Reply:
Before measuring the leaf springs on your 2018 Continental Model EC2K12-1200 Canoe/Kayak Trailer you will want to get the weight off the springs by raising your trailer to where the tires are just touching the ground.
For your slipper springs you will want to measure the points in the included picture. These measurements along with the width and weight capacity will help you to identify the correct replacement springs. You will want to ensure that the design of the spring also matches your springs as there are different slipper spring designs.
The 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles # SP-178275 will have the following measurements.
A-11"
B-22-3/4"
C-24-5/8"
D-12"
E-14-1/2"
F-4"
Spring Width- 1-3/4"
Axle Capacity- 1,500lbs
Product Page this Question was Asked From
3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- Radius End
- 1500 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 24-5/8 Inch Long
- Universal Group
more information >
Continue Researching
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Shop: 1-1/2" Square Trailer U-Bolts (Qty 2)
- Shop: Replacement U-Bolt for 1-1/2" Wide, Square Trailer Axles - 1/2" Diameter - Raw Finish
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Search Results: 265 inch leaf springs
- Search Results: 25 inch leaf springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 2,000 lbs
- Q&A: Slipper Spring Recommendation for Continental Jet Ski Trailer
- Q&A: Choosing a Replacement Leaf Spring for a 2012 Continental Trailer
- Q&A: Determining Correct Replacement Slipper Spring For Dual Jet Ski Trailer
- Q&A: 1995 Coleman Utah Replacement Leaf Springs Needed
- Q&A: Replacing Older Tie Down Engineering 46210 and 46845 Trailer Hubs
- Q&A: Replacement 4-Leaf Slipper Spring Measuring 25" Long
- Q&A: Radial Trailer Tire to Replace 5.30-12 Recommendation
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: Review of Dexter Trailer Leaf Spring Suspension - Bushings - D014-077-00
- Search Results: 44649
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Brake Controller
- Video: Lippert Solera Slider Slide-Topper Review
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 68149
- Shop: Trailer Wiring
- Search Results: 25580
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Fifth Wheel Hitch