Timbren Axle-Less System for a 6 on 5-1/2 inch Idler Hub
Question:
I wanted to know if these hubs will work on this axle. Hubs: AKIHUB-655-35-EZ-K Axle: T20BTR-EZ-7258
asked by: Eric
Expert Reply:
I have a solution for you but the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased item # AKIHUB-655-35-EZ-K you referenced does not fit the Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs item # T20BTR-EZ-7258. To use an idler hub that large you're going to need the Timbren Axle-Less Trailer Suspension System - Straight Spindle Only - 3,500 lbs item # ASR3500S05. All the 72" axle spindles are too small for 6 on 5-1/2" hubs. With the Timbren system you won't have to worry about this and that suspension system provides a safe, smooth, quiet ride for your trailer. The Timbren's will attach to any frame width. I have linked a review video.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- 58 Inch Long
- 72 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 3,500 lbs
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Shop: Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K
- Q&A: Hub and Drum Assemblies and Brakes for Timbren 2,200 Pound Axle-Less Suspension System
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: Most Popular Wheel Bearings
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Search Results: 68149
- Article: Trailer Tire Sizing
- Q&A: Seal With Dimensions to Replace 171255UC
- Shop: Gooseneck Hitch
- Search Results: 25580
- Search Results: dust cap
- Shop: Fifth Wheel Hitch
- Video: Timbren Axle-Less Trailer Suspension System Test Course
- Q&A: How to Measure Hub Face of Mobile Home Hub and Drum
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended Components for Off-Road Trailer Similar to Chevy Colorado Wheels
- Search Results: equalizer