Hub and Drum Assemblies and Brakes for Timbren 2,200 Pound Axle-Less Suspension System
Question:
What are the part numbers for the backing plates and wheel hubs for 5 on 4 1/2 wheels? I would like to run electric brakes and am not sure of the parts needed for these axles. Thanks
asked by: Robert M
Expert Reply:
Timbren axle-less suspension system # ASR1THDS02 can be used with hub and drum assembly # 84546UC3-EZ. For the right hand brake assembly use # 23-27 and for the left use # 23-26.
For nuts and washers I recommend # BIK-00. And for adjuster plugs, # BP10-220.
Products Referenced in This Question
Dexter Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Dexter Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Brake Mounting Hardware Kit for 7" and 10" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 7 Inch
- 10 Inch
- Redline
more information >
Adjuster Plugs for 7", 10", and 12" Brake Assemblies - Qty 4
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Adjuster
- Adjuster Plug
- Redline
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 4 Bolt Flange - 2.2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Can 10" Electric Brakes go on 2,200 lb Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Upgrading Axles from 2,200 lbs to 3,500 lbs to Utilize 10 Inch Electric Brake Assemblies
- Q&A: Deflection of 2,200 lb Timbren Axle-Less Trailer Suspension System
- Article: Trailer Wiring Diagrams
- Q&A: Timbren Axle-Less System With 2,200 lb Capacity Compatibility With Dexter Brake and Hubs K71-511-00
- Q&A: Difference Between Kodiak 3,500 lb Hub & Rotor Disc Brakes
- Q&A: Should Lighter Off-Road Trailer Have Brakes Added
- Article: Most Popular Wheel Bearings
- Article: Where to Position the Trailer Axle?
- Q&A: Timbren Axle-Less Suspension System For A Homemade Overlanding Off Road Trailer
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft
- Article: Trailer Lighting Requirements