Need Taller Brophy Heavy Duty Cable Camper Jacks

Question

Question:

Is there an extension thats available. 57 inches is about 1inch to short. Thanks

asked by: Greg O

1

Helpful Expert Reply:

There is not an extension to the 57" Max Lift Height, Brophy Cable Camper Jacks # CJ31 but there is a taller option. I recommend the 67" version of the Brophy Heavy Duty Cable Camper Jacks, # CX74.

expert reply by: Michael R

1

Answer 1

We do have a half kit (or single jack) of the Brophy Cable Camper Jacks - 57" Max Lift Height - 1,000 lbs #CJ31 you referenced. This is found as part #BR29ZR on our site.

view full answer...

Answer 2

The best priced pair of camper jacks we offer is the part #CJ31. If you needed a total of 4 of these jacks you'd need to order a quantity of 2 of these.

view full answer...

Answer 3

The Brophy truck camper jacks like the Heavy Duty Cable Jacks #CX74 only require two jacks to be used. The advantage is that you only need two jacks and the cost is less than purchasing four jacks.

view full answer...

Answer 4

The Rhino-Rack J-Style Kayak Carrier #S512 should fit your 2021 Toyota RAV4 roof rack just fine, but make sure the crossbars are no wider than 3-1/8" and no taller than 1-1/4" to verify fitment. You can install 2 of these kayak…

view full answer...

Answer 5

We have excellent options for replacing your truck bed camper jacks but we do not have a way to get the gears you'd need for the jacks that you currently have. Based on that you'd want the Brophy Cable Camper Jacks #CJ31 which has a…

view full answer...

Answer 6

The best and most secure camper tie down system that fits your 2016 Toyota Tundra 6.5 foot bed double cab is by far the Happijac system part #LC184089. This kit attaches to the truck frame instead of to the bed which provides a much stronger and…

view full answer...

Answer 7

I have linked the instructions for the HappiJac Truck-Mounted Camper Tie-Downs #LC184089 that fit your 2013 Toyota Tundra below. Be sure to get a set of HappiJac Original Turnbuckles #LC182898 as they are stainless steel and will last through the…

view full answer...

Answer 8

The Brophy Cable Camper Jacks #CJ31 referenced in your question are designed to allow for easy loading and unloading of your truck camper but could be used as stabilizing jacks along with the 3 existing jacks on your camper to help support and hold…

view full answer...

Answer 9

For your horizontal clearance this will really come down to your specific truck as well. The Brophy Cable Camper Jacks have an offset lifting point that is designed to even with the legs of the jacks themselves. So if your truck has fenders that…

view full answer...

Answer 10

You certainly can install two pairs of the Ark Drop Down Corner RV Stabilizer Jacks #ARK77FR on your trailer. In that case we recommend adding one jack to each corner of the trailer frame. Keep in mind that these are designed to stabilize, not lift…

view full answer...

Need Taller Brophy Heavy Duty Cable Camper Jacks

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching