Trailer Wiring Kit for 2022 Hyundai Palisade

Question

Question:

I have a grey labeled Tekonsha Voyager gold writing with a 10-02 sticker on the back. Can I use this for a 4 brake setup for a 2022 Hyundai Palisade?

asked by: Thad K

0

Expert Reply:

We have trailer wiring that is custom fit for your 2022 Hyundai Palisade with the Curt T-Connector part # CU94FR which is easy to install and very reliable. This will convert the separate taillight wiring of your vehicle to combined like what your trailer wiring needs.

I attached an install video for this kit on a similar Palisade for you to check out as well.

expert reply by: Jameson C

0

Thad K.

1/24/2022

I have a grey labeled Tekonsha Voyager gold writing with a 10-02 sticker on the back. Can I use this for a 4 brake setup for a 2022 Hyundai Palisade?

Reply

Jameson C.

1/24/2022

You can, but you'll need to use the brake controller install kit part # ETBC7 which comes with everything needed to convert the 4-way I mentioned to a 7-way and wire up the brake controller to your vehicle.

Reply

Answer 1

I do have trailer hitch receiver options that will work for your 2010 Nissan Xterra however, none of the trailer hitch receivers that are a confirmed fit for your 2004 Nissan Xterra will also fit the 2010 Nissan Xterra. For a trailer hitch receiver…

view full answer...

Answer 2

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 3

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 8

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Trailer Wiring Kit for 2022 Hyundai Palisade

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching