Flush Bar Rhino Rack Roof Rack that Fits 2022 Mazda CX-9

Question

Question:

Does this fit a 2022 Mazda CX-9? The years on the website only go up to 2021. Thanks

asked by: Alex

0

Expert Reply:

I checked with Rhino Rack and they have confirmed the fit of the RVP roof rack part # RRRVP51 on your 2022 Mazda CX-9.

expert reply by: Jameson C

0

Answer 1

The Rhino Rack RVP roof rack part #RRRVP51 is a confirmed fit for your 2018 Mazda CX-9 and does attach to the fixed mounting points the vehicle has on the roof. I attached a picture that I took from the linked install instructions (see below) that…

view full answer...

Answer 2

The Rhino-Rack RVP Roof Rack for Fixed Mounting Points part #RRRVP51 comes with two crossbars, one for the front and one for the rear. The crossbars are not the same so it dose matter which goes where. I wasn't able to find any refence to this…

view full answer...

Answer 3

I spoke to Rhino Rack about using the Rhino-Rack RVP Roof Rack for Fixed Mounting Points part #RRRVP51 on a 2019 Mazda CX-9 and they stated you must use the forward and middle mounting points. The last mounting point is only used when there are three…

view full answer...

Answer 4

Yes, we do have a set of crossbars that mount directly to your side rails and don't extend past them. They are the Rhino-Rack RVP Roof Rack for Fixed Mounting Points item #RRRVP51. This aero bar roof rack system has a 165 lbs capacity. The…

view full answer...

Answer 5

Rhino-Rack does have an RVP rack fit for your 2019 Mazda CX-9 with flush mounted roof rails with the Rhino-Rack RVP Roof Rack for Fixed Mounting Points #RRRVP51.

view full answer...

Answer 6

I spoke with my contact at Rhino-Rack who said that they don't have any notes about there being any issues between the part #RRRVP51 and the moon roof on a 2019 Mazda CX-9 but she did say that you need to be careful not to overtighten the…

view full answer...

Answer 7

Although there is no way to gauge the safe distance for cargo in the 24x60 Curt Cargo Carrier #C18152 to be sitting away from your exhaust, I may have another solution for you. The Curt #C18152 that you are interested in has a 2 inch rise in the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 10

Hey Bob, Roof rack systems are typically only rated up to 165lbs because that's typically above the capacity of the vehicle's roof. More recently all manufacturers are switching to removing the capacity from the listing and telling consumers…

view full answer...

Answer 11

Hi Duane; the Thule Motion 3 Low Profile Rooftop Cargo Box #TH37PN will fit on your 2024 Subaru Forester. The interior dimensions are 79-11/16" long x 28-15/16" wide x 10-15/16" tall so as long as your gear can fit in that space you…

view full answer...

Answer 12

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Flush Bar Rhino Rack Roof Rack that Fits 2022 Mazda CX-9

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching