7-Way For 12 Volt Power to Trailer Battery But Not Electric Brakes

Question

Question:

I need to change existing 4 pole connection to a 7 pin connector. Also need the 12v power supply line to connect to rear battery supply pole on right side rear of highlander. Do you have the 12v supply with fuse to connect? Don’t have brakes just want to charge trailer battery while driving. What items to I need to order as well. Thanks

asked by: Mike G

0

Expert Reply:

We do have what you are needing, with a 7-way kit that does not have brake wire since you aren't going to be using electric trailer brakes, and only want the 12 volt power. What you can use is the following kit:

- 7-Way RV Upgrade Kit # ETBC7L

Though the # ETBC7L is technically for brake controllers it does not have the brake wire, it comes with the 7-way, 12-gauge wire, mounting bracket and 40-amp circuit breaker (which would be used instead of a fuse).

expert reply by: Kyle S

0

Answer 1

The trailer tires we carry, including #AM1HP52 are rated for 65 miles per hour no matter if they are loaded or not. This is higher than most trailer tires and even though 65 is not fast for a passenger vehicle, it is considered high speed for a…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Sure thing, I will go ahead and list out what you need for your 2023 Kia Sportage to add a 7-way for a brake controller so you can tow with the Curt Trailer Hitch Receiver #C94WR: - T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

Yes the Curt hitch part #C12130 is a confirmed fit for your 2008 Mercury Marquis. Then for trailer wiring the Curt harness part #C59236 would be a great option. It's a universal style harness that will require hardwiring to the taillight wiring.

view full answer...

Answer 12

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

7-Way For 12 Volt Power to Trailer Battery But Not Electric Brakes

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching