55 Amp Power Converter That Will Replace Magnetek 6300 Series 45 Amp Converter

Question

Question:

I’d like to upgrade from a 45amp magnetek 6300 to something 55 amps that will swap easily and also fit directly into the cabinet where the old one is if possible.. Any suggestions

asked by: Lisa

0

Expert Reply:

Yes, you can replace the 45 Amp Converter # PD4645V for the 55 Amp Converter # PD4655V. Both these are direct replacements that will fit your Magnetek 6300 power center.

expert reply by: Bud M

0

Dave B.

3/15/2024

I don’t have the 4645. I have the 6345.

Reply

Bud M.

3/15/2024

@DaveB Yes, you have the 6345 which is a Magnetek. The 4645 is a Progressive Dynamics part which was built to fit into the Magnetek power center. We do not carry the Magnetek parts.

Reply

Dave B.

3/15/2024

Is there a Lithium specific model to replace the PD 6345 with a lithium only 55 amp model?

Reply

Bud M.

3/15/2024

@DaveB The Progressive Dynamics Replacement Section # PD4655V is a 55 amp that will work with lithium batteries as well as lead acid, AGM and gel batteries. We do not have a converter that is lithium only option for the 6300 series power centers.

Reply

Answer 1

Great question Larry, so the current version of the Progressive Dynamics converter #PD4655V does support lithium batteries as-is. At one point it did not but since lithium batteries have become more popular Progressive Dynamics decided to make this…

view full answer...

Answer 2

The Progressive Dynamics Replacement Section #PD4655V does have a jumper to change the charging profile to lithium compatible. You'll simply need to move the black jumper over from the WIZ side to the LI side.

view full answer...

Answer 3

Thanks for the pictures! To replace the converter section of your WF-8955PEC 55A power center, I recommend the Progressive Dynamics Replacement Converter for WFCO RV Power Centers item #PD4655V. This unit will fit in the same dimensions that your…

view full answer...

Answer 4

I took a look at the replacement Converter for Parallax/Magnetek or WFCO RV Power Centers #PD4655V that you mention, and unfortunately it will not work with lithium batteries, and should only be used on flooded lead acid, AGM, and gel batteries.

view full answer...

Answer 5

To replace the converter section of your WF-8955PEC you'll want to use the Progressive Dynamics Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 55 Amp #PD4655V. This unit will fit in the same dimensions that your WF-8955PEC…

view full answer...

Answer 6

There is a replacement converter section for your WFCO 8955 with part #PD4655V, but it is not compatible with lithium batteries. If you wanted to only replace the converter section then you could install the Progressive Dynamics Inteli-Power RV…

view full answer...

Answer 7

The correct replacement converter for your Parallax 7300 7345 is the part #PD4645V which is 45 amps and not what you referenced.

view full answer...

Answer 8

According to what Progressive Dynamics recommends, the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger #PD4560K18LS8 is the correct replacement for your WFCO WF-9960 converter.

view full answer...

Answer 9

The correct replacement you need for the Parallax/Magnatek 6300a model 6345 is definitely the #PD4645V. This system has the same 45-amp output and is 100% made in the U.S.A. I went ahead and attached a demo video for you to check out.

view full answer...

Answer 10

For your Parallax/Magnatek 6300A model 6345, I recommend going with the: -Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers #PD4645V. This system has a 45 amp output same as your current model 6345, will work with flooded lead…

view full answer...

Answer 11

We offer a direct replacement for your current 45A Parallax/Magnetek 6345 Power Center. The Progressive Dynamics Replacement Converter, part #PD4645V is exactly what you'd need. I've linked to a product description video for the #PD4645V…

view full answer...

Answer 12

Hey Dave, so you bought the #PD4645V converter section for your magnatek 6345 converter, is that correct? If so, the #PD4645V does have a jumper which can be set to the Li or Lithium mode. I have included a screenshot of the instructions below to…

view full answer...