Setting a Weight Distribution System On 2018 Ford F-150 with In-Bed Camper

Question

Question:

I bought the equalizer weight distribution hitch. Towing a loaded utility trailer. My question is should I set up after the truck k camper is in place or before . When I lower camper on to Truck it lowers the hitch my thought is set up while the camper is on the Truck because the goal is to distribute the weight of the trailer not the camper.

asked by: Don M

0

Expert Reply:

The weight of the cargo in the truck bed behind the axle will get factored into a weight distribution system so you will want to set the system with the truck loaded. That said, you'll likely want to consider extra support for an in-bed camper, the Timbren Suspension Enhancement System part # TFRTT1504E is designed for this exact purpose. You then might want to consider a higher rated weight distribution system to account for the extra weight but since there isn't exact an exact formula for this, much of your setup will be playing with different settings and setups.

expert reply by: Conner L

0

Answer 1

Both of the kits you mentioned are a fit for your 2016 Ford F-150. The difference is that the part #TFR1504E has a 6,000 lb capacity and the part #TFRTT1504E has a 7,000 lb capacity. You would want to go with the lower rated spring as it will be a…

view full answer...

Answer 2

The Timbren Suspension Enhancement System - Rear Axle #TFRTT1504E once the brackets are installed on the top and bottom and with the integrated spacer will give you 1-1/2 inch of clearance between the jounce spring and bracket compared to the 4-1/2…

view full answer...

Answer 3

Sumosprings are great for occasional towing and hauling as they don't decrease ride quality too much. That said, they really aren't ideal for constant loads like a truck bed camper as they don't engage right away and they are…

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, you are going to also need the Demco Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes #DM6171 when using the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040 with your Road Armor pin box. For a suspension enhancement I…

view full answer...

Answer 9

Hello Tim. We can definitely set you up with a complete AC system with an Advent low profile unit. We currently do not offer these parts as a package, but you can purchase all of the exact same components separately. To answer your question, yes, the…

view full answer...

Answer 10

Hey Michael, thanks for reaching out! The Timbren Active Off-Road Bumpstops #T28GR you installed on your 2018 Ford F-150 unfortunately have that reputation among users (although Timbren claims their systems provide a smooth ride). Because of this we…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The correct Roadactive kit that fits your 2023 Ford F-150 is the part #RAS3611-YHD. I really like the RAS kits as they basically don't have any downsides. You get the adjustable support, an easy install, no maintenance, and actually improves…

view full answer...