Trailer Hitch that Fits 2022 Hyundai Kona N Line AWD

Question

Question:

I’m looking for a mount hitch for my 2022 Hyundai Kona N Line AWD. Do you have any? If so what’s the part number? Thanks

asked by: Jigger

0

Expert Reply:

The Curt hitch part # C87DR fits the N models of the 2022 Hyundai Kona.

I attached an install video for this for you to check out as well.

expert reply by: Jameson C

0

Answer 1

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 2

The best option for a roof rack for a Hyundai Kona EV that has no factory roof rails is the unique SeaSucker Monkey Bars vacuum cup rack #298-SX6000B that installs in just seconds. Each one of the 6 powerful vacuum cups has a pull strength of 210…

view full answer...

Answer 3

I took a look at the online owner's manual for your 2019 Hyundai Kona and you are correct that they do not recommend towing a trailer with this vehicle, even if it is the EV model. Although the word "recommend" hints that you still can,…

view full answer...

Answer 4

You're in a tough spot as Thule has basically phased out your entire roof rack setup from the feet, to the bars, and the fit kit. I wish I had something I could offer that was simple and easy but based on your situation I would go with option 4…

view full answer...

Answer 5

I checked with Yakima and they do have a roof rack system available that is designed to fit your 2019 Hyundai Kona that has a completely naked roof without any side rails. For this you will just need part #Y00425 for the 50" JetStream Crossbars,…

view full answer...

Answer 6

Yes it still holds true (as of 7/2023) that you need to use the Curt Cam Buckle Stabilizing Strap for Hitch #18050 when carrying any non-trailer loads or loads not supported by tires like bike racks and cargo carriers with Curt Trailer Hitch Receiver…

view full answer...

Answer 7

Thanks for passing that info on! It's good to know that the Curt hitch 11638 part #C87DR does fit the 2022 Hyundai Kona N.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

Hey Alex, it sounds like you are looking for just the tracks of the Rhino Rack camper shell roof rack kit #Y02-480B which we do offer with the part #RTC16.

view full answer...

Trailer Hitch that Fits 2022 Hyundai Kona N Line AWD

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching