Will Curt GM Fifth Wheel Rail C88KR Work with B and Patriot Slider Fifth Wheel Hitch

Question

Question:

Will the curt part #c88kr adapter accept the BandW patriot slider. Previous models did not have the widest slots that the patriot uses. This appears to have the wider slots to accept the patriot. Can you confirm

asked by: Terry D

1

Helpful Expert Reply:

Since the Curt GM rail kit adapter part # C88KR has the wider fifth wheel slots it would be perfectly compatible with the B and W Patriot Slider fifth wheel hitch # BWRVK3270.

expert reply by: Jameson C

1

Answer 1

You can definitely still use your 18K B&W Patriot 5th Wheel Trailer Hitch #BWRVK3255 with the puck system on your new 2024 Chevy Silverado 3500 but using the Curt Adapter Rails #C88KR. These rails anchor to the puck system and provide the ISR…

view full answer...

Answer 2

To install your fixed B and W Patriot fifth wheel hitch #BWRVK3200 in the bed of your 2022 GMC Sierra 3500 that has the OEM pucks you'd just need the GM Rail Kit adapter part #C88KR. This adapter provides the standard rails your Patriot hitch…

view full answer...

Answer 3

The Reese Elite and Reese M5 5th Wheel Hitches are completely different and the Replacement Legs item #RP86FR would not fit on the Elite series. The Replacement Legs for Reese M5 5th Wheel Trailer Hitch item #RP86FR have a center to center spacing of…

view full answer...

Answer 4

Hey David, so the Reese part number 30118 is related to a hitch that was designed to fit above bed fifth wheel rails so to use it with your 2024 GMC Sierra that has the in bed puck system you would want the rail kit adapter part #C88KR.

view full answer...

Answer 5

Congrats on the new truck! You won't have to swap our your Curt Q20 Hitch but you will need to use an adapter because GM changed the puck pattern in 2020. The correct adapter is the Item #C88KR you were looking at. This will mount directly to the…

view full answer...

Answer 6

I wish I had better news but your B and W Patriot Slider hitch is the ONLY hitch that the GM rail kit adapters that fit your 2024 GMC Sierra 3500 will not work with. This is true for the Curt and Demco adapters so your best and only real option is a…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Answer 10

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 11

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

view full answer...

Answer 12

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Will Curt GM Fifth Wheel Rail C88KR Work with B and Patriot Slider Fifth Wheel Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching