Difference Between Reese 49911 And Reese 66557 Weight Distribution Systems

Question

Question:

Whats the difference between Reese 49911 and 66557 besides about $220. They look about the same except 66557 is about 30 pounds lighter.

asked by: Bill

0

Expert Reply:

Other than the price and weight difference, the Reese Pro Round Bar Weight Distribution w Sway Control # RE34FR uses round bars, and 66557 uses trunnion bars. These bars are usually priced higher than round bars nd are utilized in more heavier applications.

Additionally, trunnion bars offer more ground clearance than round bars.

expert reply by: Bryce D

0

Answer 1

The difference between the two Fastway weight distribution systems you mentioned is the bar style of either. The Fastway part #FA92-00-0600 uses trunnion bars which many prefer as you get more ground clearance with them and the part #FA94-00-0600…

view full answer...

Answer 2

The Reese Pro Round Bar Weight Distribution Hitch #RE34FR you were looking at cannot be ordered with a different shank, but it is compatible with the Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment #C17123 which gives the rise…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 6

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 7

Hey Donald, the best Blue Ox weight distribution would be the pat #BXW0550 as it has a perfect tongue weight range for your 450 lb tongue weight trailer.

view full answer...

Answer 8

Hi there Ryan; thanks for the question and the easiest weight distribution hitch to connect and disconnect after initial set up is the B&W Continuum, with the right one for your 2-1/2" hitch being the following: - B&W Continuum Weight…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

By all accounts the Curt Spectrum Trailer Brake Controller #C51170 works well and is easy to use and install on most vehicles. It is a brand new item so not a lot of feedback has come in on it. I did learn a few things though after speaking with our…

view full answer...

Answer 11

The vast majority of trailers on the market use a standard coupler (installed on top of the trailer frame) which is compatible with the B&W Continuum Weight Distribution System w/ Sway Control #BW28FR. Underslung couplers aren't as common but…

view full answer...

Answer 12

Your camper is not too light for a weight distribution system and the Reese Pro Round Bar Weight Distribution item #RE34FR will work on your trailer. This system works with trailer's that have a tongue weight between 200 lbs and 600 lbs. The…

view full answer...

Difference Between Reese 49911 And Reese 66557 Weight Distribution Systems

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching