What Components do I Need to Install Thule WingBar Evo Crossbars on My Camper Shell?

Question

Question:

I am interested in installing a Thule Roof Mounted track THTB60 or THTP54 on a Snugtop camper shell. Am I correct in assuming Ill need a set of Podiums TH460R and a Fitkit THKIT3101 to mount the WingBar Evo Crossbars TH711220? While I only need a 54 track, I noticed only the 60 inch has hardware that connects through the shell which I prefer. But the 60 inch is out of stock. Is this hardware sold separately? Thank you

asked by: Randy G

0

Expert Reply:

Yes, you are absolutely correct. In order to use the Thule Mounted top Rack System # THTB60 or # THTP54 with the WingBar Evo Crossbars # TH711220, you will need the following parts:

- Rapid Podium Feet for Thule Crossbars - Fixed Point # TH460R
- Fit Kit for Thule Podium-Style Roof Rack Feet - 3101 # THKIT3101

As far as the hardware, both the # THTB60 or # THTP54 come with hardware to install through the shell. I went ahead and attached a photo that shows the hardware that's included in the # THTP54 that allows you to achieve this.

expert reply by: Bob C

0

Hardware Included in the Thule Mounted top Rack System # THTP54
(click to enlarge)

Answer 1

The Replacement Rubber Strip for Ladder Rack TH376 - #853-3544-23 fits a channel that is 0.443 inches wide at lip. This is 70-1/2 inches long and is a thicker material. This strip is just about 1" wide total. I've linked a photo that…

view full answer...

Answer 2

To mount feet and crossbars to your Leer truck cap with the Thule Roof Mounted Top Rack System #THTP54, you will need to select the correct length cross bars. The Thule WingBar Evo Crossbars are available in the following lenghts. 43"…

view full answer...

Answer 3

You can use Podium Foot pack #TH460R, Fit Kit #THKIT3101 and the Thule square crossbars of your preferred length. Here are a few of the most popular bar sizes: #TH712200 set of two 47-inch bars #TH712400 set of two 53-inch bars #TH712500 set of two…

view full answer...

Answer 4

The Thule Aeroblade crossbar was replaced by the improved WingBar Evo which will fit the feet and fit kit you have already. For that we have the 60 inch long bar set #TH711520 which would work great. Or if you need longer we have the ProBar Evo…

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

It sounds like you are looking for a set of crossbars to mount within the track system on a Leer Truck Bed Topper and if that's the case we have some great options. I recommend the Rhino-Rack Roof Rack for Thule and Yakima Tracks part…

view full answer...

Answer 7

For the Thule Roof Mounted Top Rack System - 54" Long #THTP54 or 60" Long #THTB60 the manufacturer doesn't give a torque spec. They simply state to "tighten until there is a noticeable increase in the…

view full answer...

Answer 8

I spoke to my Yakima contact and he informed me that you will need the Landing Pad 1 #Y00221 for the tracks on your Leer camper. To complete your roof rack setup you will need: quantity 2 of the Landing Pad 1 #Y00221 quantity 4 of the Control…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

What Components do I Need to Install Thule WingBar Evo Crossbars on My Camper Shell?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching