Correct Timbren Rear Suspension Enhancement System for a 2019 Chevy Silverado 1500 z71 Trail Boss

Question

Question:

I have a 2019 Chevrolet Silverado 1500 z71 Trail boss. I would like to purchase a Timbren Rear Suspension Enhancement System. What part number do you recommend and do I need any spacers with a Enhancement Kit due to the Trail Boss Package. Thanks

asked by: Wesley S

0

Expert Reply:

The correct Timbren Rear Suspension Enhancement System for a 2019 Chevrolet Silverado 1500 z71 Trail Boss is part #TGMRCK15S which offers a simple bolt-on install. There will be no spacers or additional parts needed for installation even with the factory lift. It comes with everything you need right out the box.

expert reply by: Conner L

0

Answer 1

I have two options for you to help with squatting while towing with your 2014 Chevrolet Silverado 1500. These two options are the Timbren Rear Suspension Enhancement System part #TGMRCK15S and the SumoSprings Solo Custom Helper Springs part…

view full answer...

Answer 2

I have a solution for you but adding the Timbren Suspension Enhancement System item #TGMRCK15MR to your 2018 Chevy Silverado 1500 is not a good idea. This system is typically only used on work body trucks or vehicles that are used exclusively for…

view full answer...

Answer 3

So just to answer the first part of the question, since you don't have a lift on your 2020 Chevy Silverado 1500 you do not need a spacer to use the Timbren Rear Suspension Enhancement System #TGMRCK15S. As for comparing the Timbrens to the…

view full answer...

Answer 4

There are a few things that you can do to improve your ride quality when towing your 5,900 lb trailer with your 2000 Chevrolet Silverado 1500. The first thing that I noticed is that the 980 lb tongue weight of your trailer is close to the maximum…

view full answer...

Answer 5

The correct Timbren Rear Suspension Enhancement System for a 2021 GMC Sierra 1500 with AT4 is part #TGMRCK15S. This is a complete kit that comes with everything you need and is a confirmed fit from the manufacturer for AT4 models.

view full answer...

Answer 6

Thanks for the photo and the Timbren Rear Suspension Enhancement System #TGMRCK15S you mentioned is a good option for helping keep your 2020 Chevy Silverado 1500 level, but the best option is something a little different, the RoadActive Suspension…

view full answer...

Answer 7

The factory lift of your 2019 Chevy Silverado 1500 Trail Boss would not require you to use additional spacers to fit a Timbren kit like the part #TGMRCK15S. The best suspension enhancement for your truck is the RoadActive Suspension kit part…

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...