Do Hangers Need to be Exact Match to Use APT6SE Kit
Question:
The hangers currently on my trailer dont match the exact measurements listed in the info section describing the hangers included in this kit. Will the difference in the measurements be an issue that will cause problems, or can I use the hangers included in this kit knowing it is an acceptable difference? My hangers currently in use are Front hanger 3-1/2, Center hanger 3-5/16, and Rear hanger 5. Thanks
asked by: Danny B
Helpful Expert Reply:
Appreciate those measurements, and you are 100 percent fine using the Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers # APT6SE.
The very slight variance between your measurements and the hangers are not going to be problematic; the differences are only 1/4", 1/16", and 1/16", respectively. The 12" equalizer length is important to have correctly match, but the differences in hanger height are too miniscule to make an impact so you can absolutely use the Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers # APT6SE.
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Trailer Leaf Spring Suspension
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- etrailer
more information >
Continue Researching
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Q&A: Hanger Kit for Tandem Axle Trailer that Needs More Wheel Clearance
- Shop: Suspension Enhancement
- Article: Slipper Spring Trailer Suspension System Review
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - APT6SE Review
- Shop: Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole
- Video: Review of TruRyde Trailer Spindles - Replacement 42 EZ Lube Spindle - TRU37FR
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles - 27" Long
- Q&A: Recommended 8,000 lb Slipper Spring Hanger and Equalizer Kit for 2 Inch Springs
- Shop: #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Q&A: Replacement Leaf Spring For 3,300LB Axle Capacity With 18-1/2 Spring Eye To Spring Eye Measurement
- Q&A: Parts Needed To Mount 5,200LB Tandem Axles To a Homemade Car Hauler Trailer
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Search Results: fender marker lights
- Search Results: brake wire
- Search Results: 12 gauge wire
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Search Results: sp~285275
- Search Results: e67sr
- Search Results: sp~160275
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Dimensions of TRU37FR Replacement E-Z Lube Spindle
- Article: Double-Eye Trailer Suspension System Review
- Search Results: e74sr
- Q&A: How to Determine Hanger Spacing on 5,200 lb Tandem Axle Trailer
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Video: etrailer Trailer Brakes - Hydraulic Drum Brakes - AKFBBRK-35 Review