Recommended Hitch And Bike Rack For Carrying 2 E-Bikes On A 2021 Mazda CX-5

Question

Question:

I need to get a bike rack for our 2 ebikes and a hitch to carry them. I don't particularly like the look of hitches, so I prefer one that is mostly hidden when we aren't using it. I was originally looking at a trunk rack, but realized there is no way they can handle the weight of our bikes (about 60 pounds each). What all do you recommend?

asked by: Leon

0

Expert Reply:

You are correct in that a trunk mount rack will not be a good option for your e-bikes due to their carrying capacity. With that said, installing a hitch on your 2021 Mazda CX-5 will definitely be the better way to go. As your CX-5 will have a 350 to 525 max tongue weight capacity (check your owner's manual for your specific capabilities), I recommend going with the etrailer.com # e98902. This is an American made hitch and will have a max tongue weight capacity of 600 pounds. This will be limited to your vehicle's max capacity, but once installed, you will only see the receiver (picture included). So it will be a nice hidden hitch.

With your e-bikes being on the heavy side and this hitch having good carrying capacity, I can highly recommend the Thule EasyFold XT Bike Rack for 2 Electric Bikes # TH903202. This is rated to carry 2 bikes weighing up to 65 pounds a piece, has no issues with odd or step through style frames, and even includes a ramp for easy loading of the bikes that stores on the rack. Though this is an expensive rack, it has about every bell and whistle you could possible want. It is highly recommended.

expert reply by: Lazer S

0

etrailer.com Hitch e98902 Installed On A 2021 Mazda CX-5
(click to enlarge)

Answer 1

It can be difficult to carry a women's bike on hanging style bike racks, like the Thule OutWay #TH45JV. If you can get the arms inside the frame the bikes sit very awkward and are difficult to get on and off. The solution is a bike frame adapter…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

I would be happy to clarify the hitch requirement for you. For the Saris SuperClamp EX Bike Rack for 2 Bikes #SA4025F, I confirmed with my contact at Saris that the rack is compatible with class I, class II, and class III trailer hitches that have…

view full answer...

Answer 4

The Saris Bones part #SA805BL and the Yakima FullBack 2 Bike Rack #Y02634 are both really great bike rack choices. I would recommend the Bones for you though since you said you have a bad shoulder. This rack only weighs 10 lbs whereas the Fullback…

view full answer...

Answer 5

The best way to carry your Trek Navigator 2.0 bike is going to be a platform bike rack that grabs the bike at the frame. Since you have fenders you couldn't use a tire mount, and since you don't want to use an adapter bar you wouldn't be…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...