Full Sized Trailer Hitch for 2021 Jeep Gladiator Mojave

Question

Question:

2021 gladiator Mojave I am looking for a full hitch not a bumper to fit this model, can you help and make 100 sure its a bolt on application.

asked by: Brian S

0

Expert Reply:

We do offer a 'full' hitch for your 2021 Jeep Gladiator Mojave. You'll want to use the Draw-Tite # DR64FR which is a confirmed fit for your vehicle. The hitch is a bolt-on application, and no drilling would be required to complete the installation.

If you'll be towing with the hitch, you'll also need a trailer wiring harness, part # 118786. I'd also recommend a ball mount kit like # 989900.

expert reply by: Mike L

0

Answer 1

I checked with Curt and according to them, the Curt Trailer Hitch Receiver #CU74FR is a fit for all models of the 2020 Jeep Gladiator, including the Sport. You are correct that it will install partially through the ball mount hole in the bumper, as…

view full answer...

Answer 2

If your OEM hitch is simply bolted into place onto the crossmember, you could indeed remove it and install the Draw-Tite 76310 which we sell as #DR64FR Class III hitch in its place. If the existing hitch is welded into place, it could be an…

view full answer...

Answer 3

I have added a cutout of the linked installation instructions for the Draw-Tite Trailer Hitch Receiver #DR64FR that fits your 2020 Jeep Gladiator which show that you do not have to drill to install the hitch on your Jeep. When putting this hitch on…

view full answer...

Answer 4

For your 2021 Jeep Gladiator Rubicon you are correct that there are two trailer hitch receivers available, the Curt #CU74FR and the etrailer #e67AR. Both of these hitches are very similar in the sense that they install in virtually the exact same…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 8

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...