Availability of Keyed-Alike Coupler Locks

Question

Question:

can i get the 605dat lock keyalike

asked by: Robblees T

0

Expert Reply:

There are coupler locks that can be keyed-alike, but the Master Lock Trigger Style Coupler Lock # 605DAT that you referenced cannot.

Check out the Trailer Coupler Lock # e98884. You can order these keyed-alike if you select that feature before you hit add to cart.

I attached a link to all the keyed-alike coupler locks we offer also.

expert reply by: Jameson C

0

Answer 1

I have a solution for you, but we do not carry replacement keys for the Bulldog Trigger Style Coupler Lock #BD580404 . The way you would determine the correct replacement key would be with what is usually a 3 digit number engraved or marked on the…

view full answer...

Answer 2

I reached out to Autowbrake and found that when using the Autowbrake Electric Brake Controller #3430001 key fob the trailer lights will not activate. This includes the manual override. The key fob will cause the brakes to pulse, similar to an…

view full answer...

Answer 3

We do have a separate Junction Box #3430001-JBK you can combine with the Hopkins 7-Way Molded Trailer Wire Connector #HM20048. This harness is 11' long which will give you approximately 10' of cord outside the junction box.

view full answer...

Answer 4

Great News! The Autowbrake Electric Brake Controller part #3430001 does not require a reset if it loses power. It is designed to store the settings until the next use of the trailer and will be at the same settings as when you disconnected. It is…

view full answer...

Answer 5

Many of the lock products we offer can be ordered in multiples that are keyed alike and some of the Tow Ready brand locks are among these. The link at right will take you to our main page for locks that can be keyed alike, such as our coupler lock…

view full answer...

Answer 6

The Autowbrake Electric Brake Controller part #3430001 is a proportional controller which means it applies the brakes in an amount, proportional to the force of how the brakes are applied in the vehicle. It uses an inertia sensor inside the…

view full answer...

Answer 7

For the Fulton Fast-Lok Coupler #F346000301 you referenced you would want the Master Lock Trigger Style Coupler Lock #605DAT. Check out the picture I attached that shows it locking tightly to the trigger of a coupler. The pin diameter is 1/4 inch and…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

The brake controller port on a 2021 Ford F-150 (if equipped) will be located behind the coin tray in the center console. This will be accessed by removing the panel under the steering wheel. I have attached a video which shows this below. For a brake…

view full answer...