Recommended Trailer Hitch Fit for 2022 Honda CR-V Hybrid
Question:
Is there a trailer hitch fit for a 2022 Honda CR-V Hybrid
asked by: Cameron
Expert Reply:
There sure is!
We offer the Curt # C13397 and the etrailer brand # e98848. Both are Class III hitches and both have identical capacities and would install in the same manner. The only difference between the two is that the Curt # C13397 uses a glossy powder coat finish while the powder coat of the # e98848 has a matte finish which makes it a bit less visible, in my opinion.
Unless you're particular about the appearance of the finish, I'd recommend choosing the least expensive of the two. Since the two are so similar you can choose the least expensive and not need to feel like you've sacrificed anything.
If you'll be towing with the hitch, you'll also need a trailer wiring harness, part # 118741. For a ball mount, use # 2753 and # 19260 for a 1-7/8 or # 63845 for a 2 inch trailer ball.
I've linked to installation videos for the hitches and wiring harness mentioned above.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Product Page this Question was Asked From
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Hitch for a 2024 Honda CR-V Hybrid Sport
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Recommended Hitch for a 2024 Honda CR-V Hybrid
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Recommended Trailer Hitch for a 2023 Honda CR-V Hybrid Sport Touring
- Q&A: Will etrailer Hitch Receiver Fit a 2024 Honda CR-V Sport Touring Hybrid
- Q&A: Does 2024 Honda CR-V Bumper Need to Be Cut to Install Trailer Hitch
- Q&A: Will the etrailer Trailer Hitch Receiver Fit a 2021 Honda CR-V Hybrid
- Q&A: 2 Inch Hitch Receiver for a 2022 Honda CR-V Hybrid Touring
- Article: Rust Prevention
- Article: Best Bike Racks for Electric Bikes
- Article: Trailer Hitch Installation Tips
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)