Compatible Plug-And-Play Harness For A Redarc Tow-Pro Elite In A 2021 Jeep Grand Cherokee

Question

Question:

Looking at Redarc Tow-Pro Elite Item # RED44FR, but the harness I find Item # RED77FR states that it might not fit my car 2021 JGC with the factory tow package. Do you have a wiring harness that will allow it to fit my car?

asked by: Terry K

1

Helpful Expert Reply:

Your 2021 Jeep Grand Cherokee is going to have a plug and play connector connector located under the dash on the driver's side. At the 10:23 mark of the attached installation video you will see this connector being located. This will allow you to use the Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED77FR and skip splicing wires to install the Redarc Tow-Pro Elite Trailer Brake Controller - 2 Braking Modes - 1 to 3 Axles - Proportional # RED44FR.

expert reply by: Kevin C

1

Answer 1

I recommend using the Redarc Tow-Pro Elite #RED44FR for Off-Road towing with your 2022 Jeep Grand Cherokee. I like this controller because it can be installed virtually anywhere and it is able to seamlessly switch between proportional mode for…

view full answer...

Answer 2

The Redarc Tow Pro Elite is indeed available as part #RED44FR, it's one of our most popular brake controllers. If your 2021 Grand Cherokee has the factory tow package with the 7-way on the back bumper, you'll also need the #RED77FR wiring…

view full answer...

Answer 3

That is correct. If your 2021 Wrangler Unlimited has the connector located under the dash to the left of the steering column near the top of the e-brake pedal as shown in the provided photo, you'd use the #3073-P harness to connect the #90195…

view full answer...

Answer 4

I do have an option for you but there isn't a traditional stop light switch circuit on a 2023 Jeep Grand Cherokee L. Therefore, if you want to use a wired trailer brake controller you'd need a stop light switch like the RoadMaster Stop Light…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 10

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 11

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 12

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Compatible Plug-And-Play Harness For A Redarc Tow-Pro Elite In A 2021 Jeep Grand Cherokee

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching