Best Hitch and Trailer Wiring Recommendation for 2022 Kia Telluride

Question

Question:

Which hitch should I get for my 2022 Kia Telluride?

asked by: Cristina

0

Expert Reply:

The best hitch for your 2022 Kia Telluride is the Curt hitch part # C13420 which has the best towing capacities and is mostly hidden since only the hitch opening hangs below the rear bumper which also helps with ground clearance. I attached an install video and picture for you to check out as well.

If you need trailer wiring the Curt T-Connector kit part # CU94FR is a great option as it installs easily and has the most reliable converter box.

expert reply by: Jameson C

0

Hitch Installed on Telluride
(click to enlarge)

Answer 1

I recommend Class III 2" Curt Trailer Hitch Receiver part #C13420 for your 2020 Kia Telluride. The Curt trailer hitch is a great option because it is a concealed cross tube design. The only portion of the hitch that will be visible once…

view full answer...

Answer 2

Great questions! The difference between the Stealth Hitches that fit your 2022 Kia Telluride is that part #391KIATELL20 comes with the receiver designed to only be used with accessories (like a bike rack or cargo carrier) while the part…

view full answer...

Answer 3

Yes, the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit #391KIATELL20T is what you need for towing a trailer with your 2022 Kia Telluride. This comes with the hitch receiver for accessories (like a bike rack or cargo carrier) as well as…

view full answer...

Answer 4

There are a pair of trailer hitch receivers that fit your 2021 Kia Telluride, the Curt Trailer Hitch Receiver #C13420 and the etrailer Hitch Receiver #e95ZR. Between these two hitches, the best is the etrailer because it does not require as much…

view full answer...

Answer 5

We do have the exact 4-way trailer wiring harness that fits your 2022 Kia Telluride that will go perfectly with the Curt Trailer Hitch Receiver #C13420: - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #CU94FR To mount it…

view full answer...

Answer 6

The Curt Trailer Hitch Receiver part #C13420 which is a fit for a 2020 Kia Telluride does have a 5,000 lbs gross trailer weight and 750 lb tongue weight rating. However, this is tested separately of the vehicle which is also rated for 5,000 lbs gross…

view full answer...

Answer 7

As long as this bumper plate fits in place of the original bumper panel, it could provide an alternative to having to trim the bumper panel during installation of the Curt Trailer Hitch Receiver #C13420. The hitch is a confirmed fit while we…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...