Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
(242 reviews)
Price: $266.94
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
Item # 14374
Retail:$468.95
Our Price: $266.94
You Save: $202.01
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (242)
- Q & A (0)
- Photos
CURT Trailer Hitch - 14374
- Class IV
- 2 Inch Hitch
- 10000 lbs GTW
- Visible Cross Tube
- CURT
- 1000 lbs TW
- 12000 lbs WD GTW
- 1200 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 2" x 2"
- Rating: Class IV
- Maximum gross trailer weight: 10,000 lbs
- Maximum GTW when used with weight distribution: 12,000 lbs
- Maximum tongue weight: 1,000 lbs
- Maximum TW when used with weight distribution: 1,200 lbs
- Maximum gross trailer weight: 10,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
14374 Curt Class 4 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2010 - 2018 Ram 1500 without factory hitch
- 2019 - 2024 Ram 1500 Classic without factory hitch
- 2009 - 2014 Dodge Ram Pickup 1500 - without factory hitch
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not fit
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" - 14374
Average Customer Rating: 4.8 out of 5 stars (242 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Don07/27/2023
2014 Ram 1500
i have just received package yesterday. the outside of package showed much damage as the item had no packing support such as bubble wrap or padding. i will update review after installation to let you know of any damage.
by: Maro03/12/2017
2016 Ram 1500
Product was as advertised and the installation was very easy. everything fit without perfect. I'm not a big guy and I installed it by myself with the car parked on a flat surface. Took me 35 minutes for install. Only concern was that the box was badly damaged during shipping, thankfully product was in good condition and all hardware was there.
Maro
3/12/2018
Product has been great. The finish on the hitch receiver has held up beautifully. Thanks for checking.
by: Matt B06/02/2016
Dodge Ram Pickup
Great product! Needed a hitch for my Ram 1500, gave etrailer a shot. They were the cheapest I could find. First one that was mailed was bent(first picture). Lazer was a huge help. Excellent customer service! Helped facilitate a hassle free return and sent a new one right away. Would be five stars, if I hadn't tried to fight to get the bent one on by bending it back, as I was instructed to do by another employee(not Lazer). Wasted 3 hours and a lot of patience. Only took about 30 minutes to get the replacement on. Loops great on my truck, can't wait to put it to use!! Thanks etrailer and Lazer!
by: PhillipW01/29/2018
2012 Ram 1500
Only reason I’m not giving 5 stars is because it got bent in shipping. Not a lot but enough to not bolt up to the factory bumper bolts strait on. Once I got it lined up correctly it was no problem. Looks good and it definitely sturdy. Will have no problem pulling little pop up camper we plan on getting.
Phillipw
1/29/2019
It’s still there. No rust.
by: Paul G.12/30/2013
2014 Dodge Ram Pickup
Outstanding customer service!! They were very courteous and helpful with my order over the phone. Handling/Shipping time was fast as well and order arrived within a couple of days. The Curt Class IV hitch for my son-in-law's 2014 Ram ST Crew Cab was just what it needed. It was easy to install with the supplied hardware and instructions.
by: John 05/27/2023
Good quality trailer hitch. Shipped quickly and overall very happy. The only hang up was there was difficulty with the installation as the exhaust pipe was placed too close to where it was supposed to be mounted to the truck. This made installing much more challenging to shimmy the assembly into place for proper mounting. This added an extra hour and headache to the install.
by: Stephen K.04/06/2017
The class 3 trailer hitch I ordered was just delivered to my residents by UPS on time. This is the 1st. time I ordered anything from E Trade. A short time after I placed the ordered for the hitch that I wanted I received a call from a sales rep. He informed me they did not have that item in stock and it was going to take a little longer to get it. I informed him I needed in in a shorter time frame and he was able to help me make a change in selecting a different hitch. The hitch is not on truck yet ( this weekend) but so far I'am pleased with ETrade.
by: Steve 12/21/2023
Great service and easy to order from Adam. He got us set up with our application and walked us through the process.
by: Larry 09/29/2023
The box was in pretty rough shape, but all the fasteners were there. The install was easier than I thought it would be. I'm 74, and I installed it by myself.
by: Gary09/22/2019
I'm 67 years old with suspect shoulders but with the help of a floor jack I was able to do the installation by myself and it went very easily. One note however, the original frame bolts on the 2019 Ram 1500 Classics are metric but a 13/16 spark plug socket fits them well.
by: Brian E.09/27/2013
2012 Dodge Ram Pickup
Wow. Ground shipped. Received in two days. Installed In about and hour by myself. Rigged up two floor jacks with a board between jacks and the hitch. Cranked it up into position and bolted it in.
As you can see from pic, it is pretty concealed.
by: Rafael Gonzalez04/15/2016
Just received the curt tow hitch today and it came in pretty bad shape parts of it were sticking out from the box. A lot of scratches, shipped paint from rubbing on the floor (hopefully it doesn't rust now) some scratches/dents are very deep in others not too bad. I'm more worried about the deep ones that can cause it to rust. I'll send you some pictures.
by: Devan B06/23/2020
Great product...extremely satisfied came in a very timely manner all hardware was there with easy to follow DIY instructions install took at max 1.5 hours
2013 Ram 1500 4x4
by: Tyrone03/23/2018
2016 Ram 1500
Received quickly in 2 days. Fit correctly no problems went right on. I would have given five stars but the packaging was not good one end of the bar was sticking out of the box and the powder coat was scratched. I would definitely recommend this hitch it looks clean and installs easy.
by: Clint V. 03/04/2017
2013 Ram 1500
Product came within 2 days as I requested 2 day shipping. Got it last night around 6 pm. Got up this morning and installed the hitch. I've never installed one and it took me about 30-45 minutes. It was simple and fast. Bolted right up with no issues. Very impressed with this product. It looks clean and everything sits level. Can't wait to put it to use this weekend.
by: David04/24/2020
2016 Ram 1500
I installed this by myself in the rain!! It's literally that easy, and the tube steel looks amazing. The "how to" video for my exact truck was a huge plus for reference. Now my 2016 ram 1500 is actually a truck! I plan on using a trailer to keep my truck from getting scratched and dented with yard work.
by: Shawn01/18/2019
2014 Ram 1500
My review is close to others. Yes the shipping was fast, box was beat up. That didn’t bother me. It was an easy install (goes better with 2 people) of course but i made due. How ever the holes did not line up like others have stated and had some minor issues which the repair shop will have to address. Once that is done i look forward to pulling my camper this spring.
by: Veronica & Alexander 02/25/2015
2014 Dodge Ram Pickup
We were at all times email when the item was being shipped and if we needed additional information to contact them for help. It came sooner than expected. It was absolutely perfect for our truck. It was super easy to instal. We are READY to pull our travel trailer. Will definitely recommend etrailer 110%
by: Brian12/05/2017
2017 Ram 1500
Excellent quality, easy installation. Put this on in my driveway in less than an hr by myself. Except for the 45 pound weight, it's not much of a problem. You may need help depending on that. Very clean made product. Mine may or may not ever see weight it is capable of towing, but for not much more cost i think it is worth having.
by: Robert05/16/2023
The mounting bolts where missing but after phone call all was resolve and new hardware was sent to me for free
Excellent service
by: Adrian07/25/2022
Great quality,very clear instructions relatively easy to install with two people. 100% recommend
by: Ronda 07/29/2023
The hitch installed very simply. No issues with this hitch works great!
by: KenT10/23/2019
Great product that had a factory fit. No problems whatsoever and the install was super easy with the provided instructions. Would definitely buy again.
by: William 03/12/2023
Hitch is well constructed and installation went well with assistance from Etrailer videos. Thanks much for the fast shipping!
by: Jerry07/12/2018
2014 Dodge Ram Pickup
Wow! Fast delivery.. So excited to receive my Curt Trailer Hitch Receiver Class IV-2" for my 2014 Ram 1500, everything bolted right up with no problems... Looks well made and excited to try out my new hitch next week pulling my 27' Coachman Capri.... Part# 14374 Beats worrying about the Class 3 stock hitch receiver i had on my Ram...
Jerry A.
7/12/2019
Wow ! has it been a year? Well my Curt class lV-2 trailer hitch has given my wife and I enjoyable trips together this last year, and looking for many more Great product .
25
242
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Recommended Trailer Hitch Receiver Upgrade for 2012 Dodge Ram 1500 5.7 HemiThe factory receiver hitch is rated for 5,000 lbs towing and 500 lb tongue weight. A weight distribution system is recommended for trailers over 5,000 lbs according to the manufacturer's towing guide. For the tongue weight you desire, you can use a Class III hitch or heigher with a weight distribution system. My suggestion is to go with the Curt Trailer Hitch Receiver - Class IV - 2" # 14374 or the Class V options of # C15572 or # 41948. These all have a 2 inch receiver openings and...
view full answer... - Recommended Trailer Hitch Receiver for 2010 Dodge Ram 1500Curt Manufacturing offers a few different high quality, made in America hitches for your 2010 Dodge Ram 1500. The right hitch for you will depend on what you'll be towing and how much it weighs. If a 6000 lb towing/ 600 lb tongue weight (maximum amount of weight that can safely be suspended from the hitch) will work for you, you can't go wrong with the Curt Class III hitch, part # 13333. For a higher capacity, 10000 lbs towing/1000 lbs tongue weight, go with the Curt Class IV, part #...
view full answer... - Mounting Hole Dimensions For Curt Trailer Hitch On 2014 Dodge Ram 1500I have attached a drawing of the Curt Trailer Hitch Receiver, part # 14374 you can check out. This hitch is designed to be a fit for your 2014 Dodge Ram 1500. You are correct that the measurement is 8-7/8 inches between the 2 front mounting holes. This is the outside to outside dimension. The center-to-center measurement is 7-3/4 inches. I have attached a link to an installation video for this hitch on a 2013 Ram you can check out. If you plan on towing I recommend the etrailer.com...
view full answer...
- Trailer Hitch Option for a 2011 Ram 1500 Bighorn with OEM Hitch Under the BumperAll of the aftermarket trailer hitches that we carry for your 2011 Dodge Ram 1500 Bighorn state that they will not fit with a factory installed hitch, however, this typically refers to the factory hitches that hang below the rear bumper. I have heard of towing bumpers on Ram trucks, but I am not familiar with a Ram OEM hitch that uses the rear bumper. To determine if one of our trailer hitches will fit on your truck, you will want to look at the round cross tube that runs between the...
view full answer...
- Trailer Hitch, Wiring, and Accessories for a 2013 Ram 1500 SLTFor your 2013 Ram 1500 I recommend Class IV trailer hitch # 14374. It is rated for 1,000 pounds tongue weight and 10,000 pounds gross trailer weight. When used with weight distribution it is rated for 1,200/12,000 pounds. Check the truck owner's manual for the truck's capacities and go by the lower of the 2 ratings, the hitch or the truck. I also recommend etrailer ball mount kit # EBMK2416. It comes with a ball mount with a 3 inch rise or 4 inch drop It also includes a 2 inch ball, 2-5/16...
view full answer... - Trailer Hitch Recommendation for 2011 Ram Pickup with Factory Bumper HitchFor your 2011 Ram 1500 without a factory hitch, I recommend the Class IV hitch like the Curt Trailer Hitch # 14374. You could use an adjustable ball mount, like # C45900. This adjustable ball mount fits 2 inch hitch receivers, has a 6 inch drop, a 5 inch rise, and is rated for use with trailers up to 14,000 pounds. Because of the weight of your trailer, I also recommend using a weight distribution system. I have attached a help article with common questions about weight distribution...
view full answer... - Class IV Trailer Hitch That Fits 2019 Ram 1500 ClassicI'm not entirely sure what hitch you mean by "another" but I can tell you that we have one Class IV trailer hitch that will fit your 2019 Ram 1500 Classic, the Curt Trailer Hitch Receiver # 14374. This Curt hitch has a 2" receiver, 10,000 lb towing capacity and 1,000 lb tongue weight capacity. it is a bolt-on installation so you will not have to drill to install either on your truck. I have added a link to installs of of this hitch on a '19 Ram 1500 Classic for you and added a photo showing...
view full answer...
- Does Curt Trailer Hitch # 14374 Fit 2017 Ram 1500 Without Factory HitchThe Curt hitch part # 14374 that you referenced is a confirmed fit for your 2017 Ram 1500 that does not have a factory hitch and would work well.
view full answer... - Replacement Hardware Kit For Curt Trailer Hitch ReceiverWe sure do! You will need to use # RHK and enter the hitch item number for your trailer hitch receiver which is 14374 and in the manufacturer drop down select Curt. I included a video of the Curt Trailer Hitch Receiver # 14374 being installed on a 2015 Ram 1500 for you.
view full answer... - Can OEM Hitch on 2015 Ram 1500 Be Welded to Frame to Increase Towing CapacityIf you remove the OEM hitch on your 2015 Ram 1500 and install a heftier hitch like the Curt Class IV Trailer Hitch # 14374 you'll have a hitch that can handle 10,000 lbs towing and 1,000 lbs tongue. I don't have the authority or ability to say that welding parts of your hitch will increase weight ratings - that's something you'll have to get in writing from a dealer. With all of that being said, I do recommend checking out the weight rating of your actual truck prior to swapping out the...
view full answer... - Trailer Hitch Recommendation for 2020 Ram 15002020 was a split model year for the Ram 1500, with two distinct models that use different hitch fits, the Ram 1500 Classic which is a carryover of the 2019 model or the all-new 2020 Ram 1500. If you have the 2020 Ram 1500 Classic, the # 14374 you'd looked at would be a great choice, and would provide a 10000 lb towing/1000 lb tongue weight capacity for standard towing or # 12000 lbs towing/1200 lb tongue weight if used with weight distribution. If you have the all-new 2020 Ram, and you're...
view full answer... - Can 2018 Ram 1500 Class IV Trailer Hitch Safety Chain Loops be Used for RecoveryGreat question. You are correct that the tow hooks for a 10K Class IV hitch on your 2018 Ram 1500, like the Curt # 14374, are designed to hold the tongue of the trailer via the safety cables in a worst-case scenario. Since the trailer would be uncoupled in this kind of scenario the safety cables, and likewise the safety chain loops, need to be rated high enough to handle the weight of the trailer for an emergency stop. Manufacturers don't rate the chain loops for weight since they are...
view full answer... - Trailer Hitch Receiver For A 2020 Ram 1500 Classic Hi Scott, The Curt Trailer Hitch Receiver # C13902 hasn't been tested on a 2020 Ram 1500 Classic so while it might end up being a fit we just can't confirm it. I can however recommend some other options for your Ram that have been confirmed to fit. If you're wanting to stick with a class III hitch then I recommend the etrailer Trailer Hitch Receiver # e53ZR. If your towing capacity is higher than 6,000lbs then you can switch up to the Curt # 14374.
view full answer... - Availability of a Class V Trailer Hitch for a 2009 Dodge Ram 1500The reason that aftermarket hitches cannot be installed on a 2009 Dodge Ram 1500 with a factory installed trailer hitch is because the hitch is welded to the rear cross member and cannot be removed. It the hitch on your truck was installed by the dealer and is bolted on, it can be removed and a new hitch installed in its place. If the hitch is bolted on, we do not carry a Class V hitch for your truck, but we do have a Class IV rated and 1,000 pounds tongue weight capacity and 10,000 pounds...
view full answer... - Towing Setup for a 2012 RAM 1500I would be happy to help you set up your 2012 Ram 1500 to haul your excavator. I recommend the Curt Trailer Hitch Receiver item # 14374 this will replace your factory hitch. This hitch has more than enough capacity to handle both your trailer and excavator's combined 6,000 lbs weight. You will always want to defer to your lowest rated component's weight capacity. If you need to replace your 7-way connector the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and...
view full answer... - Higher Capacity Curt Trailer Hitch that Fits 1997 Doge Ram TruckWe have similar higher towing capacity Curt trailer hitches that fit your 1997 Dodge Ram like with the # C15318 but the # 14374 does not fit your year truck.
view full answer... - Trailer Hitch For A 2019 Ram 1500 Classic The Curt Trailer Hitch Receiver # 14374 has a maximum gross trailer weight up to 10,000 pounds and has a maximum tongue weight up to 1,000 pounds. I would recommend checking your vehicle's manual to find out the proper towing capacity of your vehicle. To install this hitch you will have to take off the hitch that the dealership installed. The trailer hitch has a bolt-on installation with no welding required, and has a gloss black powder coat finish which is over a protective base coat...
view full answer... - Will the Curt Hitch # 14374 fit a Dodge Ram 1500 with Factory Dual ExhaustThe Curt Trailer Hitch # 14374 that you referenced will work on your 2012 Dodge Ram with factory dual exhaust. Check out the install instructions and video I attached for this product. To complete your towing setup you may also be interested in purchasing the following products: etrailer.com Ball Mount Kit # EBMK2416 Trailer Light Harness # 119178KIT
view full answer... - Towing and Tongue Weight Capacity on the Curt Hitch # 13333 that Fits a 2010 Ram PickupAs for towing capacity, the hitch will work fine. However, the tongue weight you provided will be an issue with this hitch. Tongue weight is usually 10 - 15 percent of the trailer weight, in your trailer's case, between 495 - 750 lbs. If your total tongue weight, a loaded ready to tow trailer and any weight behind the rear axle of you tow vehicle, is over 600 lbs, then this could cause failure of the hitch. Because you are already really close to the tongue weight limit, I recommend...
view full answer... - Frame or Cross-Member Mount Hitch Recommended for 2014 Ram 1500 w/ 3.6L V6 EngineWhether you use a frame mounted hitch assembly like # 14374 or the receiver only type hitch that mounts to the factory crossmember like # 13333 will depend on the capacity you're looking for. A frame mounted hitch such as the Curt Class IV hitch # 14374 offers a 10000 lb towing/1000 lb tongue weight capacity which is greater than the capacity of your truck as it's equipped, so you'd be paying for extra capacity that you couldn't use. The # 13333 hitch that would bolt to the cross member...
view full answer... - Dimensions of Curt Class III Hitch # 14374I have edited a photo for you which shows the bolt hole spacing, measured center to center. I have also provided the drop of the receiver, which is the distance from the top of the receiver tube to the top of the hitch mounting flanges. Keep in mind, this hitch is custom fit for a 2009-2013 Dodge Ram 1500. Altering the hitch to fit your Ford F150 may have an unknown effect on the weight bearing capacity of the hitch, and will also void any warranty coverage.
view full answer...
- Curt Custom Fit Trailer Hitch Recommendation for 2013 Ram 1500The # C13902 is a multi-fit hitch that fits several newer trucks. The thing is though that they all require a bit of modification since the hitch is a universal design. For a custom fit Curt hitch for your truck you'd want the # 14374 instead. This requires no drilling. I attached an install video for this for you to check out as well.
view full answer... - Can the Bumper Mount Trailer Hitch e98852 for a 2019 Ram 1500 Classic Be Used For Heavy TowingI do have an option for you but in order to tow a trailer that size with your 2019 Ram 1500 Classic you are going to need a frame mount trailer hitch, the Curt Trailer Hitch Receiver part # 14374 is what I recommend as it offers simple bolt-on installation. The etrailer.com Trailer Hitch Receiver part # e98852 would not be sufficient. I will say that if you are going to be towing that heavy of a trailer then you will need to install either a set of suspension enhancements like the Timbren...
view full answer... - Recommended Class 4 Hitch For A 2009 Dodge Ram 1500If you are looking for a Class IV hitch for your 2009 Ram 1500, you will want the Curt # 14374. This will require the removal of your current hitch, but this will then bolt up pretty quickly. It will then give you a 10,000 pound towing capacity and a 1,000 pound tongue weight. This will up to 12,000 pounds and 1,200 pounds when weight distribution is used as well. However, it should be noted that these capacities may be more than your truck can handle. You will need to verify these capacities...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Randy B
Test Fit:
Jared G
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Jacob T
Video Edited:
Chris R
Written by:
Lindsey S
Video by:
Joshua S
Video by:
Patrick B
Video by:
Dustin K
Video by:
Zach D
Video by:
Jonathan Y
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
7/28/2023
The box did have a rough trip. I will have our Customer Service team reach out to you.