Compatible TorkLift Tie-Downs For A 2006 Ford F-350 Super Duty Dually With 8' Bed

Question

Question:

Will these Tie-Downs work for my truck? Part Numbers: TLF2011,TLF3004 I have found the installation video for the front for the TLF2011. Is there an installation video for the rear (TLF3004). My truck is a 2006 Ford F350 Dually

asked by: Alan

0

Expert Reply:

Since you indicated that your 2006 Ford F-350 Super Duty Dually has an 8 Foot Bed with a board or step underneath the truck bed with a factory installed hitch the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF4006 and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLF3004 you referenced would be a compatible fit. These two are the only compatible TorkLift options for your vehicle.

You will also need some turnbuckles to secure your truck bed camper to your tie-downs. I recommend the TorkLift AnchorGuard Derringer Turnbuckles for Truck Camper Tie-Downs - Stainless Steel - Qty 4 # TLS9020. These stainless steel turnbuckles have built-in levers for quick, simple tightening, making it fast and easy to secure your camper to your truck bed.

expert reply by: Kevin C

0

Alan

12/8/2021

Will these Tie-Downs work for my truck? Part Numbers: TLF2011,TLF3004 I have found the installation video for the front for the TLF2011. Is there an installation video for the rear (TLF3004). My truck is a 2006 Ford F350 Dually

Reply

Kevin C.

12/8/2021

The TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2011 are designed for a 2006 Ford F-350 Super Duty 8' bed without a board or step under the bed of the truck and a factory installed hitch. If your truck does not have a board or step under the bed then yes, you would want the # TLF2011 and # TLF3004 instead.

Reply

Answer 1

I wasn't able to find your email in our system and since we do not have any Torklift install videos for your truck I am not sure where you saw that the Derringer setup would be what you would need. Instead, the Fastgun #TLS9526-2-LK would be…

view full answer...

Answer 2

The TorkLift Talon Custom Frame-Mounted Camper Tie-Downs #TLF2021A and TorkLift Talon Custom Frame-Mounted Camper Tie-Downs #TLF3008A are designed to work with a running board or step underneath the bed so you should have no issues with your…

view full answer...

Answer 3

The TorkLift FastGun Turnbuckles for Frame-Mounted Camper Tie-Downs - Polished Stainless Steel - Qty 2 #TLS9526 do not come as singles. You may be interested in TorkLift Derringer Handles for Camper Tie-Down Turnbuckles - Qty 4 #TLS9528 for use…

view full answer...

Answer 4

The main difference between the Torklift Locking FastGun Turnbuckles, #TLS9522-2-LK, and the AnchorGuard Derringer Turnbuckles, #TLS9020, is how the camper tie-downs are mounted on your truck. The FastGun #TLS9522-2-LK are designed to be used with…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 6

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 7

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory…

view full answer...

Answer 8

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Answer 9

Hey Robert, sorry it can be a bit confusing navigating all those facets for the camper tie downs, but I did go ahead and find those tie downs you were looking for. For the front, you'll want the TorkLift Camper Tie-Downs #TL87CR (TorkLift P/N…

view full answer...

Answer 10

The centerline on the #BR27FR is going to be from the center of the hitch pin hole. If you draw a line straight out and measure the distance to the bottom of the hook that is 1". I have attached a diagram below for your reference.

view full answer...

Answer 11

Because the FlexAir pin boxes have a part that pivots it should not be used with the Anderson Ultimate 5th wheel connection. You can however use the Trailair equivalent which is #LC158778 for the Lippert 1621 pin boxes.

view full answer...

Answer 12

The F2032 you're looking for is under part #TL87CR on our website and would be the correct fit for your 2024 Ford F-350. For the rear tie-downs you'll need part #TLF3008. To complete the setup you can use the TorkLift AnchorGuard Derringer…

view full answer...

Compatible TorkLift Tie-Downs For A 2006 Ford F-350 Super Duty Dually With 8' Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching