Curt A20 Sliding 5th Wheel Hitch or Convert-A-Ball Adapter For Height
Question:
I have a 2022 Chevrolet short bed 6 1-2’ and the bed side is 21 1/2” tall. I was using a Husky EZ roller but it only adjusts to 18 1/2” and the king pin adjustment to it highest it still set down on the bed of the truck. Looking at the Curt A20 w/S20 slider it adjusts to 21 1/2”. Or converting to Convert a ball fifth wheel to gooseneck with the offset and poly cushion. With the Curt spyder gooseneck hitch. The truck already has the rails in the bed. So, just asking if it’s better to stay fifth wheel or go to gooseneck?
asked by: Tony T
Expert Reply:
Hi Tony; that's a good question and unequivocally the better option is the Curt A20 5th Wheel Trailer Hitch w/ S20 Slider # C55DR.
This will not only give you extra height, but won't void the warranty on your trailer frame like the Convert-A-Ball adapter does, gives you better turning clearance, and is just a more secure overall set up than what is essentially two different adapters.
The # C55DR is also just a really good hitch overall with a superb interlocking jaw system for a tight fit around the king pin, color indicators that let you know if the jaws on the hitch are ready to couple, uncouple or tow, and built-in zerk fittings so you can easily lube the hitch.
Product Page this Question was Asked From
Curt A20 5th Wheel Trailer Hitch w/ S20 Slider - Dual Jaw - 20,000 lbs
- Fifth Wheel Hitch
- Sliding Fifth Wheel
- Above Bed Rails
- 5000 lbs Vertical Load
- 20000 lbs GTW
- Cushioned 360-Degree
- Standard - Double Jaw
- 17-1/2 - 21-1/2 Inch Tall
- 12 Inch Fore/Aft Travel
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Fifth Wheel Hitch
- Shop: Curt S20 Slider for E16, A16, and A20 5th Wheel Trailer Hitches - 12" Travel
- Shop: Curt A20 5th Wheel Trailer Hitch w/ S20 Slider - Dual Jaw - 20,000 lbs
- Q&A: Replacement Trailer Grease Seals for Allis 5013 29772
- Article: How to Raise Your Travel Trailer Height
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Q&A: Replacement Hub for 2013 Wildwood 26TBSS Hub Drum with AL-KO 8700
- Q&A: Kit to Convert 2021 Vanleigh Pinecrest 335RLP to Electric Over Hydraulic Disc Brakes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Torque of Mounting Nuts on Lippert Torsion Axle Lift Kit
- Article: Double-Eye Trailer Suspension System Review
- Article: Slipper Spring Trailer Suspension System Review
- Article: Where to Position the Trailer Axle?
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Article: Ram Trailer Tow Prep Package
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
Tony T.
3/15/2024
That was my thoughts as well, but just had to ask. I will be ordering today.