bing tracking image
Q & A Icon

Can Type 1 Propane Connector be Used for Propane Tank with Threads on Outside  

Question:

From reviewing your info on propane hoses and connections, I believe I currently have a POL connection going to the tank pic attached. Can I replace this with a Type I connection, without worrying about it leaking?

0

Expert Reply:

Thank you for the photo! Since your propane tank has the threads on the outside and inside it means that you can use a pigtail with either the POL or Type 1 connection like you're asking about. Swapping over to the Type 1 is a great idea just because it's easier to twist on plus you don't have to mess with any kind of sealant.

If your regulator has the adapter on it then I recommend using the MB Sturgis Propane Pigtail - Stainless Overbraid - Type 1 x 1/4" Male Inverted Flare - 15" # 100833-15 that you were looking at, but if your regulator doesn't have that adapter then you'll need to either install it using the adapter part # 402258-MBS or by using a standard pigtail like part # 100473-15-MBS.

Review videos have been linked for you to check out.

expert reply by:
0
Jon G
Can Type 1 Propane Connector be Used for Propane Tank with Threads on Outside
Can Type 1 Propane Connector be Used for Propane Tank with Threads on Outside
(click to enlarge)

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>