Recommended Trailer Hitch Receiver for 2021 BMW X5 M50i

Question

Question:

Id like to know if any of your stealth kits are compatible with the specific 2021 X5 variant that I have: the X5 M50i. Thanks!

asked by: Kelvin

0

Expert Reply:

The Stealth Hitches Hidden Rack Receiver # SH89VR is confirmed to fit your 2021 BMW X5 M50i. This hitch has a totally hidden design with a removable receiver tube that can be towed when not in use. It has a maximum tongue weight of 600 lbs, but cannot be used for towing without the additional # SH58VR towing kit.

If you would like to get the hitch with the towing kit, the # SH25VR is also available. The kit comes with a 7-way wiring harness, hitch ball and safety chain loops. If you do not plan to do any towing at this time, the kit can always be purchased and added on later if you need it.

I have attached an installation video for your reference.

expert reply by: Robin H

0

Answer 1

I've just concluded a phone call with the folks at Stealth Hitch. If your 2020 BMW X5 is an M Sport model, the #SH25VR will fit. If you have the X5 M model, Stealth has not yet been able to obtain one of those vehicles, so they have not been able…

view full answer...

Answer 2

When installing The Stealth Hitch #SH89VR onto your 2023 BMW X5 there is no type of fascia or bumper trimming needed in order to install it. The bumper and fascia will remain intact, but there is a small piece that is underneath your vehicle that you…

view full answer...

Answer 3

The Stealth Hitches that fit your 2022 BMW X5 will have a 600 lb tongue weight rating and an 8,000 lbs tow weight rating. If you are planning on using this for accessories, like a bike rack or cargo carrier, then you need the kit #SH89VR which comes…

view full answer...

Answer 4

The Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit - Custom Fit - 2" #SH25VR you were looking at is confirmed to fit your 2021 BMW X5 and is a fantastic option since it is completely hidden when the removable receiver or ball mount…

view full answer...

Answer 5

Thanks for your question. I will gladly clarify. The Stealth Hitches Hidden Rack Receiver - Custom Fit - 2" item #SH89VR you referenced will fit the 2019 BMW X5 with the M Sport Package. The reason it says it does and doesn't is because…

view full answer...

Answer 6

We do have an option for you to add a hitch receiver and tow with your 2020 BMW X5 xline, though the Stealth Hitches Hidden Rack Receiver #SH89VR has a receiver that is for use with accessories only. In order to tow with your '20 BWM X5 xline,…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...