Difference Between Tuson Heavy Duty Truck Module Kits for DirecLink Brake Controller

Question

Question:

I have a 2007 Volvo 670 VN. What is the difference between 335HDCON-9PIN and the335HDCON-9PIN-G500, and can I use either on my HD Truck?

asked by: Gary

0

Expert Reply:

The difference between the two is the 9-pin Deutsch connector they are compatible with; one is for green 9-pin Deutsch connectors (which have a slightly larger pin size) and the other is for the standard 9-pin Deutsch connector. So you wouldn't be able to use either on your truck, you would need to look at your 2007 Volvo 670 VN to see what color the 9-pin connector is; this is typically found under the dash. That will allow you to determine the right connector:

- Tuson Heavy Duty Truck Module Kit for DirecLink Brake Controller - 9 Pin with Green Connector # 335HDCON-9PIN-G500

- Tuson Heavy Duty Truck Module Kit for DirecLink Brake Controller - 9 Pin # 335HDCON-9PIN

These kits can be used with Tuson DirecLink Base Model Trailer Brake Controller # 335DL-100.

expert reply by: Kyle S

0

Answer 1

For your 2009 Volvo 780 I recommend the Tuson DirecLink Base Model Trailer Brake Controller - 1 to 4 Axles - Proportional #335DL-100 which will be able to control up to 4 axles with brake assemblies. The correct Tuson Heavy Duty Truck Module Kit for…

view full answer...

Answer 2

Since even semi trucks like what you have use OBDII connectors the Tuson DirecLink Base Model Trailer Brake Controller #335DL-100 that you referenced can be used. The module of this is what interprets the brake signal from your tow vehicle and…

view full answer...

Answer 3

The king pin dimensions can be the same between fifth wheel trailers and large commercial trailers. Both types of trailers often use a standard 2 inch king pin although semis sometimes have a 3-1/2 inch. As long as your truck fits a 2 inch king pin…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 11

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Answer 12

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Difference Between Tuson Heavy Duty Truck Module Kits for DirecLink Brake Controller

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching