Warranty for Adco SFS AquaShed RV Cover for 5th Wheel Camper # 290-52253

Question

Question:

We have harsh winters with lots of wind and snow. Will this cover hold up? Is there a warranty, and if so, for how long?

asked by: Kathy

0

Expert Reply:

Adco SFS AquaShed RV Cover for 5th Wheel Camper, # 290-52253 is listed as best for short-term storage in moderate climates and comes with a two year warranty that covers defects to any materials or workmanship. This too has a 2-Year limited warranty.

The Camco UltraGuard 5th Wheel Cover - 28' Long, # CAM45752 is a cover of similar dimensions but recommended for use in cold, snowy regions.

expert reply by: Michael R

0

Answer 1

If you have the Andersen Ultimate Connection 5th Wheel Trailer Hitch System with the adapter to connect a fifth wheel king pin to the gooseneck hitch then you can use Ultra-Fab Gooseneck Trailer Tripod Stabilizer - Steel - 31" to…

view full answer...

Answer 2

The Adco SFS AquaShed RV Cover for 5th Wheel Camper - Up to 28' Long - Gray Item #290-52253 will offer better UV protection than the Camco UltraGuard 5th Wheel Cover - 28' Long Item #CAM45752. The heavy-duty, 3-layer fabric protects…

view full answer...

Answer 3

When measuring for storage covers for 5th wheel trailers you would not include the height of the AC or vents on the roof. Camco UltraGuard 5th Wheel Cover #CAM45751 would be closer to the length you will need at 26 feet. It is 110" tall…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack…

view full answer...

Answer 6

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 7

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 8

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Either the Kuat Tranfer 1 #KU64FR or the RockyMounts MonoRail Solo 1 #RKY10007 would handle the bikes you describe easily. Both would hold the bikes by the tires, so the fact that the rack won't come into contact with the frame will work well…

view full answer...

Answer 11

Yes, it does. The Hollywood Racks LED Light Bar item #HLY54RR is wired for a 4-way but comes with an adapter that will plug into a 7-way like yours to power the lights.

view full answer...

Answer 12

I can help you choose between the Kuat Sherpa 2.0 and Kuat Transfer V2, as both are really nice bike racks. Let me start off, since you mentioned 3-bike rack, if that's what you were after you would need the Kuat Transfer V2 Bike Rack for 3 Bikes…

view full answer...