Dimensions of CE Smith Padlock Brackets CE26002Z-2

Question

Question:

Hello, Can you tell me how tall the brackets are please?

asked by: David L

0

Expert Reply:

From the base to the top of the bracket where the bolt hole is measures an inch, and the total length is 4-1/8 inches for the CE Smith Padlock Brackets for Spare Tire Carriers # CE26002Z-2.

These brackets will fit the CE Smith Spare Tire Carrier for Trailers - Steel - 4- and 5-Lug Wheels - 8-3/8" Long # CE22007Z-11050-2 or 12-1/4" Long # CE22011Z-11050-2.

expert reply by: Kyle S

0

Length of CE Smith Padlock Brackets CE26002Z-2
(click to enlarge)

Answer 1

I can end this debate for you real fast! Trailer tires, which will have an ST in front of the size, should always be inflated to the maximum psi indicated on the tire. Trailer tires usually do not have a recommended and maximum psi indication so I am…

view full answer...

Answer 2

The CE Smith Spare Tire Carrier part #CE22007Z-11050-2 has the same dimensions as the longer version that you already tried part #CE22011Z-11050-2 except shorter so yes, the wider portion of the u-bolt will be 3-3/4 inches and the narrower portion…

view full answer...

Answer 3

The CE Smith Spare Tire Carrier - Locking - Steel - 4-Lug and 5-Lug Wheels - 8-3/4" #CE27202 will fit horizontally as long as your tongue is not more than 3" tall, but I do not recommend it as it will have half of the tire sticking below…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 6

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 7

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 8

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 9

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 10

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 11

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 12

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...