Replacement Screen Door Latch For A 2014 Forest River Rockwood Mini Lite Travel Trailer

Question

Question:

I need the inside latch part, RH for lippert screen door latch for Forest River,Rockwood Mini Lite

asked by: Glenn M

0

Expert Reply:

We don't currently carry the right hand inner latch but we carry the Bi-Directional Screen Door Latch # 37206-11865 which can replace your current Lippert screen door latch and will come with all needed hardware to install on your 2014 Forest River Rockwood Mini Lite Travel Trailer.

expert reply by: Kevin C

0

Answer 1

We do have a couple of options that you may be interested in, like the Camco RV Adjustable Screen Door Standard Grille #CAM43980, which is meant to fit a variety of doors measuring 20" to 29" tall, and 24" wide. So, if you measure the…

view full answer...

Answer 2

This is not really the recommended setup, but you could use a 110v fan like the 42" Hugger Style RV Ceiling Fan #277-000086 in your 12v DC setup if you have a power inverter on your 5th wheel that supplies both 110v and 12vDC power throughout…

view full answer...

Answer 3

RV screen door latches are fairly universal as long as you get a similar type. I recommend the Bi-Directional Screen Door Latch Item #37206-11865. This latch can be used as a right hand or left hand latch and comes with a new strike keeper and…

view full answer...

Answer 4

The easiest way to figure out if the fan is 12v or 120v is to try to turn the fan on while you aren't hooked up to shore power. If it turns on without being hooked up to shore power or a generator, then it is a 12 volt fan. According to all of…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

While we do not carry that particular Lippert step we do have the similar MORryde #MR98RR or a better option in my opinion is the TorkLift GlowStep #TLA9104. I prefer this step as it folds up nicely and works better in tight areas like storage lots.…

view full answer...