Does Anyone Make A Screen Protector For A Challenger Door On A 2017 Forest River Wolf Pack TT?

Question

Question:

Hello My Wolf pack 365 16 has doors made by challenger not LCI will the Defender work on theses doors. Or is anyone making a screen protector for challenger doors.

asked by: Nate F

0

Expert Reply:

We do have a couple of options that you may be interested in, like the Camco RV Adjustable Screen Door Standard Grille # CAM43980, which is meant to fit a variety of doors measuring 20" to 29" tall, and 24" wide.

So, if you measure the size screen you need and it falls within these measurements, then # CAM43980 will work great for you.

Or

If you are able to provide some measurements, I'd be happy to help.

expert reply by: Bryce D

0

Answer 1

We don't currently carry the right hand inner latch but we carry the Bi-Directional Screen Door Latch #37206-11865 which can replace your current Lippert screen door latch and will come with all needed hardware to install on your 2014…

view full answer...

Answer 2

The Camco #CAM43980 screen door protector isn't designed to be specific to any particular door. The protector is 24 inches wide, and is height adjustable from 20-29 inches, as shown in the provided photo. So, you can measure your existing…

view full answer...

Answer 3

The Camco RV Adjustable Screen Door Standard Grille #CAM43980 referenced in your question measures 24 inches long one way and 20 to 29 inches the other way. The screen can be mounted in either direction. I have attached an image to assist.

view full answer...

Answer 4

If you want a 1-1/8" cam lock for baggage doors with the CH751 key you can order the JR Products #372325 locks in any quantity.

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Does Anyone Make A Screen Protector For A Challenger Door On A 2017 Forest River Wolf Pack TT?

Product Page this Question was Asked From

Continue Researching