Is There Cushioned Pin Box for 2017 Keystone Raptor 412

Question

Question:

I have broken my leaf springs twice now. After first time I replaced all six and did morryde shackles today on way home broke another ?also what size pin box dose my trailer have I’m thinking about flex air pin box

asked by: Vernon H

1

Helpful Expert Reply:

Your 2017 Keystone Raptor 412 has a Lippert 1116 pin box so for a cushioned replacement the Trailair part # LC155943 is the correct fit and would work great. There isn't a Flex Air that fits your trailer.

Now if you are continuously breaking leaf springs that to me would indicate you are exceeding the weight capacity of the springs or are driving on very rough roads. Can you get back to me and let me know what springs you have and what the weight of your trailer is when loaded?

expert reply by: Jameson C

1

Vernon H.

11/8/2021

You told me it would take a LC 155943 I take this is a trail air? To fit my 2017 keystone raptor 412 Would a 158777 fit ?

Reply

Les D.

11/11/2021

Your 2017 Keystone Raptor 412 has a Lippert 1116 pin box. Any pin box replacement will have to use the 1116 bolt pattern. The Lippert Trail Air # LC158777 pin box that you referenced has a 1716 bolt pattern. and will not fit. There are three 1116 pin boxes available. I have included a link to those below. The Air Ride version previously recommended is be far the best model. Before making a purchase you will need to verify that your fifth wheel hitch will work with the model chosen.

Helpful Links

dept-pg-fifth_wheel_king_pin-co-lippert_1116-pm-lippert.aspx

Reply

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 4

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 5

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 6

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 7

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 8

I checked with GEN-Y and they were able to get me the distance from the top bolt hole of the #GY48GR down to the bottom of the coupler which you can see in the attached picture as well as a few other dimensions. It's 23.8 inches. It does not come…

view full answer...

Answer 9

There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 This 5th…

view full answer...

Answer 10

Thanks for providing that information it really makes this simple. To find the right Gen-Y we need to calculate your tongue weight using the formula GVWR x 0.22 = TW. The Z2900 has a GVWR of 14,495 lbs so the TW is 3,189 lbs. Based on this…

view full answer...

Answer 11

In regards to a Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter like part #RP94720 and a Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Adapter Pin Box like part #325-GH-8045, the main difference is that one uses air for…

view full answer...

Answer 12

Thanks so much for that info Tyler, and I was able to find the right Gen-Y gooseneck pin box for you. Since you have the Lippert Rhino on your 2024 Jayco Eagle 355MBQS, the right option is the following: - Gen-Y Hitch Shock Absorbing 5th Wheel to…

view full answer...

Is There Cushioned Pin Box for 2017 Keystone Raptor 412

Product Page this Question was Asked From

Continue Researching