Recommended X-Chocks For A 17" Wheel Spacing

Question

Question:

Do you have or know where I can get X chock stabilizer’s that extend to 18”. The space between our tires is 17”.

asked by: Gene B

0

Expert Reply:

X-Chocks that fit a tire distance of 17" will actually go longer than 17" to ensure a tight fit against the wheels. For example I went out to the warehouse and measured the Super Grip Chock XL Wheel Stabilizers for Tandem-Axle Trailers and RVs - Qty 2 # UF21-001095 and they were able to extend past 18". I recommend going with the # UF21-001095 over the # UF21-001070 you were looking because the # UF21-001095 has adjustable feet to get a full grip against the tires unlike the # UF21-001070.

expert reply by: Kevin C

0

Answer 1

Sorry for any confusion that may have arose, but what you want is the U-Bolt Kit for Mounting 8,000-lb, Round Trailer Axles #APUBR-35. These are designed for 3 inch diameter, 8,000 lb axles and are compatible with the Roadmaster Comfort Ride Leaf…

view full answer...

Answer 2

The Fan-Tastic Vent Roof Vent w/ 12V Fan part #FV802250 is capable of moving up to 920 cubic feet of air per minute (CFM) at its highest setting. It also has two other settings with reduced cubic feet per minute ratings. The vent will fit most…

view full answer...

Answer 3

Yes, you can use the Roadmaster Comfort Ride Leaf Spring Suspension Kit 8K part #RM-2460-2580 with 7,000 lb axles.

view full answer...

Answer 4

You can certainly still install an air bag kit on your 2023 Toyota Tundra with a 1" coil spacer. If the lift adds distance between the axle and the frame, you can use the spacer kit #F2536 with the #F89VV Air bag Kit to compensate for the lift.…

view full answer...

Answer 5

To be completely honest the sway control feature of the B and W Continuum part #BW78FR isn't nearly as advanced as the rest of the system. The advertised sway control of this system is in the head of the system between where the ball and the…

view full answer...

Answer 6

If the trailer is less than 1 inch off of being perfectly level either up or down then it will be perfectly fine. Having it slightly higher would be better because presumably the tongue weight of the trailer will pull it down a little. You could also…

view full answer...

Answer 7

To activate the brakes on a trailer with your 2024 Toyota Grand Highlander you'll need a 7-way connector and brake controller. To switch over from your 4-pin connector you can install the #ETBC7L. This will plug into your 4-pole connector and…

view full answer...

Answer 8

Hey Charles, so the reason the RV Bumper Bike part #S80605 that you referenced requires 2 inches between the bottom of the trailer body and the top of the bumper is to clear the mounting hardware. So if you are sure you don't have that clearance…

view full answer...

Answer 9

I do have an option for you but the Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate part #VGD-10-4000 does not have a spot for the factory backup camera. Therefore you would either need to find a way to mount this yourself, go without, or…

view full answer...

Answer 10

Most manufacturers are in the process of discontinuing their fifth wheel tailgates with the camera relocation kits due to mechanical issues. Therefore I could not find one that fits your 2017 Ford F-350 Super Duty. The Stromberg Carlson 4000 Series…

view full answer...

Answer 11

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Recommended X-Chocks For A 17" Wheel Spacing

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching