What Is The Total Length Of The Snap-Up Lever For Equal-I-Zer Weight Distribution Systems.

Question

Question:

Would you be able to provide the overall length of the lever.

asked by: Kevin

1

Helpful Expert Reply:

The Replacement Snap-Up Lever for Equal-i-zer Weight Distribution Systems # EQ95-01-6050 comes in two halves that thread together.

The lower half is 11-1/8 inches and the upper half is 11-1/4 inches.

The total length of the lever is 22-3/8 inches.

expert reply by: David B

1

Answer 1

I'm assuming you mean the length of the Snap-Up Lever for Fastway e2 Weight Distribution Systems #FA92-00-6000. It is 19.5" long. If you're asking about capacity it doesn't have anything specific but is capable of handling any…

view full answer...

Answer 2

For your older Quest QX-3202 in your 2008 Cruiser RV Fun Finder X, I recommend checking out the: -iRV RV Stereo #IRV64FR. While this stereo is not the same size as your Quest CD player, measuring in at 8-1/4" wide x 4-3/8" tall x…

view full answer...

Answer 3

I have a solution for you, but there is not a stereo that we have available that is the same size as your Quest QX3202. I recommend replacing your old unit with theiRV RV Stereo - Double DIN - HDMI, AUX, Bluetooth, App Control - 50W - 3 Zone - 12V…

view full answer...

Answer 4

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 5

The most similar trailer clearance lights we offer to replace the PM150 lights you have now would be the Thinline LED light part #AL91RB. For a replacement harness that would plug into this you'd need the part #A46PB and then for a grmmet part…

view full answer...

Answer 6

Hey Sandra so we've actually checked with Dometic in the past about seeing if they have replacement foot pedals for the 310 and they do not have that as a replaceable part. Only solution would be to replace the toiled or modify what you have now…

view full answer...

Answer 7

Hello Ed. Unfortunately, the flush ball on the Dometic 310 Toilet #DOM57FR is not replaceable. Believe me, I wish they were, because we get asked about this a lot. If the flush ball is damaged, you will have to replace the toilet with a new one.

view full answer...

Answer 8

Reese doesn't offer a spring bar handle as a replacement part for the #RE44FR weight distribution kit, but luckily the Equal-i-zer #EQ95-01-6050 would work for you.

view full answer...

Answer 9

That's a good question, and the answer is yes, the improved version is in fact the Triple LED Trailer Tail Light - Stop, Tail, Turn, Backup - Red and Clear Lens #CE44VR. This is the updated replacement of the 003-30LEM2, but with a much better…

view full answer...

Answer 10

Thanks for the picture! I reached out to my contact at Lippert and you will need the replacement motor #LC183058 which will be a direct replacement for the HappiJac 70425-004.

view full answer...

Answer 11

The dimensions I could find for a Norcold 1210 fridge are 68.88 T x 37.88 W x 28.75 D. The closest 12v fridge we carry to this size would be the Everchill RV Refrigerator w/ Freezer Drawer #WAY44FR, which is 28-1/2" wide x 72" tall (at…

view full answer...

Answer 12

We have previously confirmed with Dometic (who own Atwood now) that the Atwood 91349 that you've got can be replaced by the Replacement Control Panel for Atwood Water Heaters #AT91367 you were looking at.

view full answer...