What are the Best Tire Chains for My 225/75-16 Tires on My 2021 Ford E-Series Cutaway?

Question

Question:

I have a 2021 Ford e-series cutaway. I am looking for the absolute best snow chains for my 225/75-16 tires.

asked by: Tyler

0

Expert Reply:

For the absolute best snow chains for your 2021 Ford E-Series Cutaway with 225/75-16 tires, I recommend the Konig Self-Tensioning, Low-Pro Snow Tire Chains - Diamond Pattern - D Link # TH04115245. The Konig chains have self-tensioners that will tighten to the tire's surface during transport so that you do not have to manually tighten them. In addition, the chains come with dual-sided d-shaped links for increased traction on ice and snow.

expert reply by: Bob C

0

Answer 1

We have several great and different options for tire chains for the size 225/75R16 that you have on your RV. The absolute best and easiest option is the Easy Fit part #TH04115245 which install in a matter of seconds, provide great traction, and also…

view full answer...

Answer 2

If your 2018 Thor Class C is built on a 2017 model year Ford E-Series E350 Cutaway Chassis with V8 or V10 engine then you can use the Roadmaster Reflex Steering Stabilizer #RM-RBK24-RSSC. This and all other kits for the 2017 chassis are shown on the…

view full answer...

Answer 3

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Answer 4

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 5

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 10

In regards to the Roadmaster Exact Center Steering Stabilizer part #RM47MR, the stabilizer installs on the front of the steering arm pointed down. I have attached a photo of this below. If this wasn't what you were looking for, please just let me…

view full answer...

Answer 11

Hey David, for your 2014 Thor 31L Class C motorhome you would want the Roadmaster Front Sway Bar part #RM-1109-149 which is a confirmed fit. This is designed to use factory endlinks though so you'd need to reuse what you have or get new ones from…

view full answer...

Answer 12

I found the online version of the install instructions for the Exact Center stabilizers like the #RM47MR. What's fun is that just when you think you have found the correct step to address your problem it tells you to continue to the next step.…

view full answer...