Can The Bauer Products Camper Door Lock Be Mounted In Either Left Or Right Hand Orientation.

Question

Question:

Is this lock interchangeable for both left and right hinged doors

asked by: Gerald P

1

Helpful Expert Reply:

Bauer Products Camper Door Lock - Black # BA65FR can be mounted in either orientation.

I suggest going with the Bauer Products Motorhome Door Lock - Black # BA64FR. It can be mounted in the left or right hand configuration. It can be keyed alike, I also like that it has two lock cylinders that allow you to secure the latch and the deadbolt independently of each other.

expert reply by: David B

1

Answer 1

The Bauer Products Motorhome Door Lock #BA64FR and it's sister option #BA65FR are the only options we carry that are close enough to fit your 5" wide by 4-3/4" tall (with minor trimming to get your 5" width to 5-1/4"). The…

view full answer...

Answer 2

Your old Trimark requires a cutout hole measuring 5" wide x 4.85" tall. You could use the Bauer Products Camper Door Lock #BA65FR that you were looking at but would need to trim the cutout hole an extra 1/4" wide to fit. The face plate…

view full answer...

Answer 3

The Bauer Products Camper Door Lock - Black Item #BA65FR will fit your 2010 Casita Travel Trailer as long as the cutout hole from your previous door lock measures 5-1/4" wide x 4-1/2" tall and you door is 1-1/4" to 1-1/2" thick.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

We may have some potential options for replacing the tack room door lock on your Featherlight trailer. Is the 5" L x 5" H dimension you gave for the door cutout or the lock itself? The best way to find the right replacement lock is to go by…

view full answer...

Answer 7

I have some great replacement RV door latch options. The only one we offer that would come close to fitting such a large cutout is the Bauer Products Camper Door Lock part #BA65FR which fits up to 5-1/4" wide x 4-1/2" tall openings so…

view full answer...

Answer 8

Hey Mark, since we know your Brinkley Z3100 has the Rhino style pin box, the correct Gen-Y fifth wheel to gooseneck adapter is the part #GY98GR which comes with the auto latch you mentioned wanting as well!

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 11

According to B&W the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit part #BWGNRK1020 is about a 2 hour install by a professional. All the Hardware is provided. I have attached the installation instructions so you…

view full answer...