Replacement Options For An RV Entry Trailer Lock With A 5" x 4-3/4" Cutout Hole

Question

Question:

Are there any alternatives to the BA64FR? My cutout is 5x43/4. The latch looks identical, but an it’s pricey. 97 sooner 5 horse with living quarters.

asked by: Chris

0

Expert Reply:

The Bauer Products Motorhome Door Lock # BA64FR and it's sister option # BA65FR are the only options we carry that are close enough to fit your 5" wide by 4-3/4" tall (with minor trimming to get your 5" width to 5-1/4"). The only other option would be to contact a manufacturer like Global Link, Bauer, or Lippert to see if they have one matching your current lock or if they can custom make one for you.

expert reply by: Kevin C

0

Bauer Lock Exterior Measurement
(click to enlarge)

Answer 1

I tried finding information on the TRI/MARK #1993/7230 that you currently have. But, I was not able to locate much with that information. The Bauer Products Motorhome Door Lock #BA64FR, will most likely work. It is a popular size for RV's.…

view full answer...

Answer 2

I have some great replacement RV door latch options. The only one we offer that would come close to fitting such a large cutout is the Bauer Products Camper Door Lock part #BA65FR which fits up to 5-1/4" wide x 4-1/2" tall openings…

view full answer...

Answer 3

We do have entry door locks that come with a deadbolt like the Bauer Products Motorhome Door Lock - Black #BA64FR but do not currently have any that are also keyless entry. Manufacturers do not list the cutout hole dimensions for their trailers so…

view full answer...

Answer 4

Manufacturers do not list the entry door lock sizes they use so you would need to remove your current door lock and measure the cutout hole to confirm fitment. This can easily be done by removing the screws on the inside portion of your door lock…

view full answer...

Answer 5

The Bauer Products Motorhome Door Lock #BA64FR is the closest we have to the cutout size you have. This door lock requires a 5-1/4" wide x 4-1/2" tall opening so you will need to widen your opening by 1/2'. This door does…

view full answer...

Answer 6

The Dexter Spindle Nut #6-183 used with your 50mm Nev-R-Lube bearing #31-71-3, requires 145 to 155 ft/lbs of torque, according to the manufacturer's specifications. See attached diagrams for step by step instructions.

view full answer...

Answer 7

Dexter Nev-R-Lube Bearings such as the 50MM #31-71-3 referenced in your question do not have a specific maintenance or replacement schedule. These are pre-lubricated at the factory, which will make it resistant to contamination, and sealed for life…

view full answer...

Answer 8

For the size you listed it sounds like you need a full-sized door latch like the part #L3980 that mounts in door openings that are 3-3/8" x 4-5/8" hole. This is a very common door latch seen on horse trailer as well.

view full answer...

Answer 9

For in FIC 233348 CR6, I suggest the Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option - White, #295-000021, or the polished chrome, #295-000002. Please note the attached installation video. This replacement latch measures…

view full answer...

Answer 10

Possibly; you'll need to take some measurements as there are no specific door locks and handles for any specific RV. So measure the door thickness and cut out. For example, if you have a door that is 1-1/4" to 1-1/2" thick…

view full answer...

Answer 11

Typically a travel trailer will have a 3-3/4" tall x 2-3/4" wide cutout for the door lock like the Global Link Ultra E Pro Electronic Lock for Travel Trailer #295-000183. So your 4-3/4" x 2-3/4" cutout is a bit…

view full answer...

Answer 12

I was able to go out to our warehouse and measure the face plate on the Bauer Products Camper Door Lock #BA65FR. The face plate is 5-1/2" tall and 5-7/8" wide.

view full answer...

Replacement Options For An RV Entry Trailer Lock With A 5" x 4-3/4" Cutout Hole

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching