What Parts do 4-Way and 7-Way Wiring Harness do You Recommend for My 2021 Jeep Wrangler?
Question:
what parts do I need to install a 4-way and a 7-way wiring harness to my 2021 Jeep Wrangler?
asked by: Betty
Expert Reply:
As far as wiring, for the 4-way, you need the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118786. The T-One includes a ModuLite power converter to ensure that your vehicle's wiring matches that of your trailer. If you are looking to add a brake controller to the trailer with a 7-way, you will need the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat # ETBC7 in addition to the T-One.
If you are looking to add a brake controller, I recommend the Tekonsha Voyager # 39510 or the Curt Echo # C51180. Both of these controllers are proportional controllers which means that the controller activates the trailer brakes in proportion to your vehicle's braking action. The Voyager is more of a traditional-style controller than requires mounting into the dashboard of your vehicle near the steering wheel. On the other hand, the Curt Echo allows you to control the settings of your controller with the ease of your Smart device.
If you need help installing any of these components, I went ahead and linked walk-through videos to guide you through the process.
Products Referenced in This Question
Tekonsha Voyager Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Manual Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- Indicator Lights
- Up to 90 Degrees
- Tekonsha
more information >
Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional
- Trailer Brake Controller
- Proportional Controller
- Hidden
- Up to 2 Axles
- Smartphone Display
- CURT
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Does Installing A Wiring Harness On A 2021 Jeep Wrangler JL Require A Wire Run To The Battery?
- Q&A: Parts Needed to Add 7 Way Trailer Connector to 2020 Jeep Wrangler without Towing Package
- Article: My Trailer Hitch Doesn't Fit
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Trailer Wiring Diagrams
- Q&A: Parts Needed to Flat Tow A 2022 Jeep Wrangler 4xe Behind a 2022 Newmar Kountry Star With Air Brakes
- Q&A: Correct Gen-Y Pin Box to Replace a MORryde RPB72-1716
- Q&A: Is It Required To Run a Power Wire When Installing 4-Way Vehicle Wiring Harness 2023 Jeep Wrangler?
- Article: Roadmaster Vehicle Specific Base Plates
- Q&A: Does Curt Wriing for a 2024 Jeep Wrangler Require Connecting the Power Wire to the Battery
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)