Differences Between Trailer Hitches for 2022 Chevy Bolt EV

Question

Question:

What's the difference between the Eco hitch and Draw Tite hitches available for a 2021 Chevy Bolt EV?

asked by: John D

0

Expert Reply:

Both the EcoHitch # 306-X7359 and the Draw-Tite # DT47GR are partially concealed once installed. The only visible portion of the hitch will be the receiver tube and safety chain loops, with the remainder of the hitch being concealed behind the vehicle's bumper.

The EcoHitch # 306-X7359 features a 2 inch receiver tube, so if you're needing the hitch for a hitch mounted accessory designed for a 2 inch hitch, this would be the hitch you'd want to use. The Draw-Tite # DT47GR has a 1-1/4 inch receiver tube, so if your hitch mounted accessory is compatible with a 1-1/4 inch receiver, you'd want to go that route.

The EcoHitch model also has a higher tongue weight capacity at 300 lbs, versus the 200 lb capacity of the Draw-Tite. Tongue weight is the maximum amount of weight that can safely be suspended from the hitch.

If I personally had to choose between the two, I'd go with the EcoHitch because the 2 inch receiver is much more prevalent, and there are many more hitch mounted accessory options that would be compatible.

If you'll be using the hitch for light duty towing, for the EcoHitch, you'd need a ball mount like # D-28, a hitch pin like # PC3 and # 40038 for a 1-7/8 inch or # 63845 for a 2 inch trailer ball.

If you go with the Draw-Tite, you'll need a # 3593 ball mount, # 19256 for a 1-7/8 inch or # 19258 for a 2 inch trailer ball. The hitch pin is included with the ball mount.

For a trailer wiring harness, use part # 119147KIT.

I've linked to some videos that you might find helpful.

expert reply by: Mike L

0

Answer 1

I have a really great option for an E-Bike carrier to fit the Class I Draw Tite hitch part #24956 you have installed on your 2017 Chevy Bolt but more to your question we can't recommend the use of a Class II only bike rack in a Class I hitch. Not…

view full answer...

Answer 2

The area on the 2017 Chevy Bolt EV that needs to be trimmed is the center, lowest point of the rear fascia that, once trimmed and the hitch installed, won't be visible. The area being trimmed is 3-1/4 inches across and 5 inches deep/tall. I have…

view full answer...

Answer 3

Thanks for passing that on! I am posting this on our site with your pictures to other owners of the 2022 Chevy Bolt EV that the Draw Tite hitch part #24956 does fit!

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Differences Between Trailer Hitches for 2022 Chevy Bolt EV

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching