Replacement Lower Assembly For 2" Thule XT Bike Rack

Question

Question:

What are the numbers to order a new hitch locking wheel assy . I assume it comes with the long all thread that adjusts the locking wedge

asked by: John Z

1

Helpful Expert Reply:

The only way for you to get the new hitch lock wheel assembly is with replacing the entire 2" Lower Assembly # TH37MY. This is the only way the parts that you are needing are available for the Thule XT Bike Rack.

expert reply by: Bud M

1

Answer 1

The upright arm on the Thule T2 Pro XTR Bike Rack for 2 Bikes part #TH83JV can be replaced yes, that said you must buy this as an assembly with the tray. The Replacement Spar Tube Assembly for Thule T2 Pro XT part #7524703001 for the one closest to…

view full answer...

Answer 2

The hand knob on the Thule T2 Pro XTR 2 Bike Platform Rack #TH83JV has a lock cylinder on it. So once you put the T2 into your 2018 Honda Odyssey's 2" hitch such as #e98855 and the Auto Pin goes through the hitch pin hole and shank it cannot…

view full answer...

Answer 3

The Curt hitch part #C23FR is a fit for your 2020 Ford Escape Hybrid and can install without a die grinder or any power tools. You can use a file to enlarge the hole which is a very common approach. Or a drill could work too if you happen to have…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 8

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Replacement Lower Assembly For 2" Thule XT Bike Rack

Product Page this Question was Asked From

Continue Researching