Does Trailer Hitch Install on 2022 Hyundai Kona Require Drilling or Trimming

Question

Question:

do the trailer hitches that fit a 2022 hyundai kona need any type of drilling or fascia or bumper cutting or trimming? I see that the trailer hitches for a 2020 hyundai kona do not so I'd like to make sure that the same is true for the 2022 model.

asked by: Matthew E

0

Expert Reply:

I am happy to verify for you that no drilling, fascia trimming, or cutting is required during the installation of the trailer hitch receivers that fit your 2022 Hyundai Kona:

- Curt Trailer Hitch Receiver # C11529

expert reply by: Kyle S

0

Answer 1

Yes the Draw Tite hitch part #DT52GR is a confirmed fit for your 2020 Hyundai Kona.

view full answer...

Answer 2

Yes. The Draw-Tite #DT52GR is a confirmed fit on the 2021 Hyundai Kona EV. I have linked the installation instructions for the Draw-Tite #DT52GR for you to have a look at, but it looks like the passenger side dust panel will need to be removed for…

view full answer...

Answer 3

Yes, the Curt Trailer Hitch Receiver #C87DR does fit your 2022 Hyundai Kona N-Line. Additionally, if you're needing wiring the correct part is Wiring Harness #C59236.

view full answer...

Answer 4

The Draw-Tite #DT52GR trailer hitch for your 2022 Hyundai Kona is a direct bolt on application that will require no drilling to get installed. The underbody panel(s) and/or fascia must be temporarily loosened or removed and then trimming may be…

view full answer...

Answer 5

For your 2022 Hyundai Kona I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #DT52GR. This is a Class 3 hitch with a 2" receiver. It has a concealed cross tube so you will only see the receiver hanging down at the back for more of…

view full answer...

Answer 6

The bolts that are used are Class 5 if they are Silver and Class 8 is they are a Gold color. If you are looking for replacement hardware for your Curt #14001 Trailer Hitch, you can use the Replacement Hardware Kit, part #RHK. All you need to do is…

view full answer...

Answer 7

The only avavailbe trailer hitch options for a 2022 Hyundai Kona are class I, of which I recommend the Curt Trailer Hitch Receiver part #C11529 which offers a bolt on fit with 1-1/4" opening. If you have 2" accessories you'll have no…

view full answer...

Answer 8

For your 2022 Hyundai Tucson the Draw Tite hitch part #DT22MR is a confirmed fit and would be a great option for carrying your bike rack as it has more than enough capacity, is the 2 inch hitch size which more bike racks are made for, and it has a…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

We haven't had the chance to install either the Curt #C11529 trailer hitch on the 2018 Hyundai Kona, so I'm not going to have a precise measurement for you at this time. That said, from what I can tell, based on the installation photos, this…

view full answer...

Answer 11

Yes, the Curt hitch part #C11529 that you referenced does fit the front wheel drive and the all wheel drive versions of the 2022 Hyundai Kona.

view full answer...

Answer 12

The Curt Trailer Hitch Receiver #C11529 is a confirmed fit for the 2022 Hyundai Kona. We have several reports of this hitch being installed on the 2022 without an issue, but it may be possible your hitch is slightly bent. One thing that is…

view full answer...

Does Trailer Hitch Install on 2022 Hyundai Kona Require Drilling or Trimming

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching