Placement of B&W Gooseneck Hitch for a 2008 Ford F-450 Flatbed

Question

Question:

2008 F 450 Flatbed 8’ wide x 9.5’ long Where is the best location in relation to the rear axle? Also in relay to the rear corners of the bed?

asked by: O V

1

Helpful Expert Reply:

Installation of the B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks, # BWGNRK1500 is forward of the axle 2 to 6 inches. Ensuring that you have at least 72 inches from the corner of the bed to the center of the socket.

expert reply by: Michael R

1

0000001
(click to enlarge)

0000002
(click to enlarge)

Answer 1

Yes, if you already have the B&W Turnoverball Underbed Gooseneck Trailer Hitch part #BWGNRC800 you can purchase just the B&W Turnoverball Gooseneck Custom Installation Kit for Ford part #BWGNRM1111 which would then give you the B&W…

view full answer...

Answer 2

B & W doesn't offer a bolt-on application for a cab and chassis truck but they do offer options that could work for you. If your 2000 Ford F350 has the steel flat bed, B&W recommends the #BWGNRK1500. This is a weld-on application. Or,…

view full answer...

Answer 3

Since flat beds have a tendency to be a bit longer than standard truck bed I'd recommend putting the B and W Turnoverball #BWGNRK1500 right over the rear axle. Any further forward and you'd be more likely to have clearance issues between the…

view full answer...

Answer 4

To install the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1300 in the bed of your 1991 Dodge Ram Pickup with an 8 foot bed you will need to align the hitch between the truck bed and the frame of the truck and then you will drill…

view full answer...

Answer 5

I would be happy to help you find a 5th wheel hitch for your 2022 RAM 3500 crew cab chassis. There are a couple of options depending on your preferences. However, both will require welding so not the easiest install. The first option and my…

view full answer...

Answer 6

Good questions, and let's start with the better brand of gooseneck for your flatbed truck (which will lead to the proper positioning), and by far the best option is the B&W, which is the following part number: - B&W Turnoverball Underbed…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 10

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 11

I recommend using the B&W Ball and Safety Chain Kit #BWGNXA2061 for the factory puck system on your 2020 Ford F-350 Super Duty. I like this kit of the Curt #C60692 and Reese #RP30137 options because it uses a handle to secure the gooseneck hitch…

view full answer...

Answer 12

Yes, since the Gen-Y Hitch Gooseneck Trailer Hitch for Ford OEM Puck Systems #GY43XR has a 5" offset it will place the pin weight 2-1/2" behind the current center of your gooseneck hitch ball. This does means the front axle will be prone to…

view full answer...

Placement of B&W Gooseneck Hitch for a 2008 Ford F-450 Flatbed

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching