Are the Frame Brackets for the B&W Turnoverball Gooseneck Hitch GNRK1111 Sold Separately

Question

Question:

Can I buy just the brackets and bolts that mount to the truck frame rails

asked by: Kevin W

0

Expert Reply:

Yes, if you already have the B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRC800 you can purchase just the B&W Turnoverball Gooseneck Custom Installation Kit for Ford part # BWGNRM1111 which would then give you the B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRK1111.

expert reply by: Conner L

0

Answer 1

What you'd need to install the B and W Gooseneck Turnoverball Hitch in your 2016 Ford F-250 is a rail kit that will allow you to use the center section you already have. For that you'd need the #BWGNRM1111 and you'd be set.

view full answer...

Answer 2

I reached out to my contact at Retrax who said that the number you gave me means that you have the RetraxONE MX Hard Tonneau Cover #RT60373 on your 2016 Ford F-150 with the 5-1/2' bed. If your cover is leaking at the tailgate and you have…

view full answer...

Answer 3

Yes, we do offer the B and W Turnoverball Gooseneck Install kit part #BWGNRM1111 that you are looking for. With that said the correct rail kit for a 2005 Ford F-250 short bed is the part #BWGNRM1108 so that would be the kit you'd want.

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 10

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 11

The Gen-Y Hitch 5th Wheel to Gooseneck Pin Box part #GY58GR is primarily designed for long bed trucks. It's no different than a standard fifth wheel pin box in regards to the size. If you were using a fixed hitch and standard pin box before with…

view full answer...

Answer 12

The best way to prevent any clearance issues with your 2022 KZ Durango Gold G356RLQ and your 2020 Chevrolet Silverado 2500 with 6-1/2' bed and factory puck system is by using the Demco Autoslide 5th Wheel Hitch #DM79GV. This hitch slides back and…

view full answer...

Are the Frame Brackets for the B&W Turnoverball Gooseneck Hitch GNRK1111 Sold Separately

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching