Will the Draw-Tite Hitch # DT74MR Fit My 2021 Hyundai Sonata Hybrid?

Question

Question:

Will this fit on a 2021 Sonata Hybrid?

asked by: RALPH K

0

Expert Reply:

Yes, the Draw-Tite Sportframe Trailer Hitch # DT74MR is confirmed to fit your hybrid model of 2021 Hyundai Sonata.

If you need a wiring harness to complete your setup, I recommend the T-One Vehicle Wiring Harness # TK97FR. This harness will provide your trailer with basic brake light, turn signal, and running light functions.

expert reply by: Bob C

0

Answer 1

Yes it does; per the manufacturer the correct Draw-Tite trailer hitch that fits your 2023 Hyundai Sonata hybrid is the following: - Draw-Tite Sportframe Trailer Hitch Receiver #DT74MR

view full answer...

Answer 2

The Draw Tite Hitch part #DT74MR that you referenced is a fit for your 2021 Hyundai Sonata Hybrid Limited. With just this hitch you'd have everything needed to install a bike rack like our very popular Hollywood Racks Trail Rider #HR200Z that…

view full answer...

Answer 3

The trailer hitch options for a 2021 Hyundai Sonata do require removal of the heat shield. I recommend the Draw-Tite Sportframe Trailer Hitch Receiver part #DT74MR which is a class I hitch with 1-1/4" receiver tube opening. The heat shield…

view full answer...

Answer 4

The Draw-Tite #DT74MR is definitely a good place to start when setting your 2021 Hyundai Sonata to tow your jet ski and trailer. You are correct in that you will need a few more parts to get everything connected and working properly, though. First…

view full answer...

Answer 5

The Tekonsha T-One #118304 and Curt T-Connector #C55580 Vehicle Wiring Harnesses are very similar. These are both custom fit wiring harnesses that include a tail light converter, which is required for your 2007 Toyota Sienna because the brake and…

view full answer...

Answer 6

Functionally speaking, there isn't a huge difference. The Curt #C56382 has a slightly lower capacity at 3 amps for circuit for stop/turn signals and 6 amps for taillights. The Tekonsha #118781 has a capacity of 5 amps per stop/turn circuit and…

view full answer...

Answer 7

The heat shield of the 2020 Hyundai Sonata gets in the way of the Draw Tite hitch part #DT74MR from fitting. If you check out the included instructions you can see that the hitch installs on top of where the heat shield sits.

view full answer...

Answer 8

For a great hitch for your 2022 Hyundai Sonata, I recommend the Draw-Tite Sportframe Trailer Hitch Receiver - 1-1/4" #DT74MR. The reason why I recommend this hitch over other hitches like the Curt Hitch - 1-1/4" #C23HR is because the…

view full answer...

Answer 9

Yes, that note is accurate. A Class I trailer hitch receiver is limited to only 2 bikes regardless of the amount of weight it's carrying. This is due to the exaggerated force caused by the additional leverage from the bikes being further away…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

The trailer hitches we currently have available that are confirmed to fit your 2003 Toyota Corolla are all Class I hitches. The different class ratings for trailer hitches primarily refer to the maximum weight the hitch can safely handle. The size of…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Will the Draw-Tite Hitch # DT74MR Fit My 2021 Hyundai Sonata Hybrid?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching