Does 2016 Ford Transit T250 Without Rear Bumper Indentation Fit etrailer Hitch e98842

Question

Question:

My Transits back step plate doesnt have the center indentation thats shown in the vehiccle in the installation video. Is this hitch still compatible, or will it become hidden under the step plate?

asked by: Bob S

1

Helpful Expert Reply:

Yes the etrailer hitch part # e98842 does fit your 2016 Ford Transit T250 even though yours does not have the recessed portion on the rear bumper like our install video vehicle has. I attached a link to that install video on this page for you to check out as well.

expert reply by: Jameson C

1

Answer 1

The good news is that this isn't the first time that this has happened with the installation of Trailer Hitch #e98842 . I talked to Curt and they mentioned that this can happen if you end up tapping the bolts in too far. Unfortunately the only…

view full answer...

Answer 2

The etrailer #e98842 hitch is 35-1/2" wide when measured from bolt hole to bolt hole; this is going to be the most important measurement for this hitch since it will determine the overall fit. The bolt holes on the frame are 2.43" center on…

view full answer...

Answer 3

For your 2021 Ford Transit T250 the etrailer hitch part #e98842 is the highest capacity hitch available that's confirmed as a fit and is also compatible with dually setups.

view full answer...

Answer 4

The Curt Trailer Hitch Receiver #C13902 is a multi-fit, universal hitch which means there isn't a list of vehicles it does fit, and there are much better options for a custom-fit hitch for your 2017 Ford Transit T350. So long as your T350 is the…

view full answer...

Answer 5

As long as your 2020 Ford Transit T250 isn't an Cab/Chassis or Cutaway Chassis model, the etrailer brand #e98842 hitch would be a fit. 'With ease' is a pretty subjective term. The install won't require any modifications to the…

view full answer...

Answer 6

For the hitch I recommend using the etrailer #e98842, which will give you a reliable hitch with a 2" receiver for your T250. For the wiring I recommend using the Curt T-Connector #C56327. This is a plug and play installation and will provide you…

view full answer...

Answer 7

The model of vehicle does impact the time it takes to install a trailer hitch and wiring, although for a 2017 Ford Transit T250 a decent ballpark estimate is 1-1/2 to 2 hours. The good news is there is a very simple to install trailer hitch for a…

view full answer...

Answer 8

I can help you troubleshoot your wiring issue. You are correct when you say that you will need the power converter that is used by the Curt harness #C56249 you referenced. This will have a 12 volt wire run to the battery and will allow all your…

view full answer...

Answer 9

Because of the way the Thule T2, #TH9044-TH9046, is designed, there is actually a rise of 4-3/4 inches from the top of the receiver opening on the trailer hitch to the bottom of the nearest platform. The rack angles up even more towards the back and…

view full answer...

Answer 10

The hitch I recommend for your 2019 Ford Transit T350 is the etrailer part #e98842 as it is by far the best value and a great choice for a kayak trailer. We have hitches with higher capacities like the Curt #C14012 but that would be a bit overkill…

view full answer...

Answer 11

The trailer hitch I recommend for a 2017 Ford Transit T350 is the etrailer Trailer Hitch Receiver part #e98842 which is a direct bolt-on fit with no cutting or drilling required. It comes with hardware and instructions which is everything you will…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Does 2016 Ford Transit T250 Without Rear Bumper Indentation Fit etrailer Hitch e98842

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching