Hidden Trailer Hitch Recommendation for 2021 Chevy Traverse for Carrying Bike Rack

Question

Question:

What hidden hitch should I get for my 2021 Chevy Traverse to carry my bike rack?

asked by: John

0

Expert Reply:

For your 2021 Chevy Traverse the Curt Class III part # CU29FR is a great hidden option for carrying your bike rack that once installed fits behind the rear removable panel of the vehicle to allow access to the hitch when wanted or make it totally out of sight when not needed.

I attached an install video for this hitch for you to check out as well.

expert reply by: Jameson C

0

Install picture
(click to enlarge)

Answer 1

The Curt Trailer Hitch Receiver C13380 was discontinued back in 2020 which is why you aren't able to purchase it. This was replaced with the Curt Trailer Hitch #CU29FR for your 2020 Chevy Traverse which has a better design since the crosstube is…

view full answer...

Answer 2

For your 2020 Chevrolet Traverse I recommend the Curt #CU29FR. This is a great choice for both towing and accessories. If you're going to be towing a trailer I recommend a wiring harness like part #118287 and a ball mount that has the correct…

view full answer...

Answer 3

While we do have options for your 2019 Chevy Express Van, we do not carry any drill-free 90" running boards are compatible. With that being said, the only drill-free option we have is the Rough Step #DZ15300A-15316 (aluminum) or #DZ15300S-15316…

view full answer...

Answer 4

The difference is that the Curt Trailer Hitch #CU29FR has a glossy black finish while the etrailer Trailer Hitch #e56YR has a matte black finish. Aside from that these will be exactly the same for your 2022 Chevy Traverse. I recommend going with the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Hidden Trailer Hitch Recommendation for 2021 Chevy Traverse for Carrying Bike Rack

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching