What Size Hitch Ball Does 2020 Keystone Bullet 291RLS Use

Question

Question:

I have a 2020 keystone bullet 291rls with blue ox sway pro. What size hitch ball do I need. Im not able to see it on the coupler because its not stamped very well.

asked by: James S

0

Expert Reply:

According to what I was able to find your 2020 Keystone Bullet 291RLS has a coupler designed for a 2-5/16 inch hitch ball so for hitch ball that works with your WD system and is right size you'd want the part # 63847.

expert reply by: Jameson C

0

Answer 1

The TorkLift Cannon Hitch Extension #TLE1636 is specifically designed to fit your 3" Ford receiver. This will extend your receiver 36" and reduces it to a 2-1/2" receiver with an included reducer to a 2" receiver as well. It can…

view full answer...

Answer 2

The Atwood water heaters had some of the biggest cutout wall openings, so any unit you find to replace it will require some trim and/or backing work to mount in your RV. The cutout on your Atwood should be about 16" tall X 15-1/2" Tall X…

view full answer...

Answer 3

We do indeed offer some hitches that are designed to bolt to the frame of your travel trailer. If the frame members on your travel trailer are between 18-51 inches apart, the Curt Hitch #C13701 would be an excellent choice, with it's tongue…

view full answer...

Answer 4

You can use the Curt friction style sway control, #17200 on the left or right side. You will need to loosen the handle and the other bolt below it, pull the inside arm out, flip it over, then reinsert it. You will then need to unscrew the handle on…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 10

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 11

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 12

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

What Size Hitch Ball Does 2020 Keystone Bullet 291RLS Use

Product Page this Question was Asked From

Continue Researching