Can I Route the Video From the Furrion Vision S to My Smart Device?

Question

Question:

Can this camera go through my phone?

asked by: Gregory J

0

Expert Reply:

I have a Smartphone option for you. Unfortunately, the Replacement Shark Fin Camera Mounting Bracket for Furrion Vision S RV Camera Systems # FRCBRKT-BL only comes with a replacement mounting bracket for a Furrion Vision S camera like the # FOS43TASF. All Vision S models come with a monitor and you will not be able to route the video signal to your Smart device.

With that being said, a camera that does allow you to view video on your Smart device is the VueSMART RV and Trailer Backup Camera # HM34FR. As far as video, the VueSMART connects to Android or iOS devices via WiFi. The camera provides a 152-degree viewing angle that minimizes blind spots and helps prevent accidents. Also, it comes with 6 LEDs that surround the camera lens to provide night-time vision. Another impressive quality of the VueSMART is that it is constructed with a IP69-rated waterproof design that withstands weather and pressure washing. I went ahead and attached an installation video of the camera to walk you through the process.

expert reply by: Bob C

0

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 2

Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…

view full answer...

Answer 3

Hey Rosemary; I'm happy to verify for you it is compatible. The #FRCBRKT-BL is actually the bracket for the camera but is the Vision S system. But the camera that mounts to that bracket will absolutely work with the Replacement 5" Monitor…

view full answer...

Answer 4

The Furrion cameras, like what comes in the part #FOS43TASF that replaced the part you referenced, are only compatible with their specific monitors. If you are looking for a camera system that allows you to use your smartphone as the monitor then I…

view full answer...

Answer 5

Yes, you can remove the Shark Fin Camera Mounting Bracket #FRCBRKT-BL which includes the wiring from your 2024 Forest River Flagstaff Super Lite 26FKBS for a Voyager system. The Kit #ASA24YR you found is specifically designed for trailers pre-wired…

view full answer...

Answer 6

Based on the sharkfin camera mount in the picture you provided I can tell you that your 2021 Amerilite 189DD was prewired for Furrion cameras #FRCBRKT-BL. Because of this you won't be able to find an adapter but can cut the plug-in off of the…

view full answer...

Answer 7

For a replacement mounting bracket, you can use part #FRCBRKT-BL. This is compatible with all Furrion Vision S RV cameras that use the shark fin style housing, including your model FOS48TAPK-BL, which has been replaced by #FOS43TASF.

view full answer...

Answer 8

The plunger pins are usually specific to the brand of jack and usually are not interchangeable. Unfortunately, without knowing the manufacturer and model number of your existing jack, I cannot say with certainty that the pin will work for you. I have…

view full answer...