How Do I Replace A Handle On My Valterra Waste Valve
Question:
My rig came equiped with an 8inch extension handle, that threaded into valve stem..this extension snapped off,,leaving the treaded porshion stuck inside stem, so a replacement 8extension can not be screwed in..Do you carry a sleeve may be ,3inch long that would slide over the 2 shafts so as to join then and secure with a few set screws on each stem,
asked by: Robert J
Expert Reply:
I spoke to a Valterra representative and I was told that they do not offer a sleeve to slide over the two shafts to join them together. If the male thread has broken in the handle, and the coupler is still in working order, you may be able to use Extension Rod Kit for Valterra Waste Valve - Adjustable - 6" to 8" and 9" to 11", part # T1046-12VP. The extension rod and mounting bracket would attach to the coupler of the waste valve. If the coupler is not intact you will have to replace the valve body. If you have a 3" waste valve you will need part # T1003VP. If you have a 1-1/2" waste valve you will need part # T1001VP.
I have included product description links, a demo video link, and an installation video link below.
Products Referenced in This Question
Valterra Bladex Waste Valve Body for RV Gray Water Tank - Plastic Handle - 1-1/2" Diameter
- RV Waste Valves
- Straight Valve
- Single Waste Valve - Manual
- 1-1/2 Inch Valve Body
- Stationary Valve
- Valterra
more information >
Valterra Bladex Waste Valve Body for RV Black Water Tank - Plastic Handle - 3" Diameter
- RV Waste Valves
- Straight Valve
- Single Waste Valve - Manual
- 3 Inch Valve Body
- Stationary Valve
- Valterra
more information >
Product Page this Question was Asked From
Extension Rod Kit for Valterra Waste Valve - Adjustable - 6" to 8" and 9" to 11"
- Accessories and Parts
- RV Waste Valves
- Waste Valve Parts
- Handles
- 6 - 9 Inch Long
- Valterra
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Valterra Bladex Waste Valve Body for RV Black Water Tank - Plastic Handle - 3" Diameter
- Q&A: 3 Inch Waste Valve for Black Water Tanks with a Removable Handle
- Shop: LaSalle Bristol Waste Valve Body for RV Black Water with Seals and Hardware - 3" Diameter
- Shop: Valterra Bladex Waste Valve Body for RV Black Water Tank w/ Drilled Stem - 3" Diameter
- Shop: Valterra Bladex Waste Valve Body for RV Gray Water Tank - Aluminum Handle - 1-1/2" Diameter
- Shop: RV Roof Membrane
- Shop: Valterra Waste Valve Body for RV Black Water Tank w/ Coupler, Seals, and Hardware - 3" Diameter
- Search Results: toilets
- Search Results: toilet
- Shop: Alpha Systems Butyl Tape for RV Weatherproofing - 20' x 1" x 3/16"
- Shop: Extension Rod Kit for Valterra Waste Valve - Adjustable - 6" to 8" and 9" to 11"
- Video: Valterra Bladex RV Gray Water Tank Waste Valve Body Review
- Q&A: Black Tank Blade Valve Not Working
- Shop: RV Exterior Lighting
- Search Results: rv porch light
- Video: Valterra RV Sewer T1046-12VP Review
- Q&A: How to Install the Valterra Cable with Valve Handle # TC72PB
- Video: Valterra RV Sewer - Waste Valves - T1001VP Review
- Video: Valterra RV Sewer - Waste Valves - T1003VP Review
- Search Results: black water tank valve
- Q&A: Replacing Valterra Valve with LaSalle Bristol Cable-Actuated RV Waste Valve
- Search Results: 25580
- Q&A: Wiring Diagram for Dometic Single Zone Thermostat and Control Box
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: awning
- Q&A: Determining The Correct Capacity Gen-Y 5th Wheel Pin Box For A Grand Design Momentum 397TH
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Search Results: break away switch
on Accessories and Parts
