Recommended Storage Cover for a 2021 Winnebago Micro Minnie 1700 FB

Question

Question:

Which storage rv cover for a 2021 winnebago micro minnie 1700FB. The trailer with hitch measures 19 feet 4 inches.

asked by: WENDY S

0

Expert Reply:

For your 2021 Winnebago Micro Minnie 1700 FB, I suggest going with the Adco Polypropylene Storage Lot RV Cover for Travel Trailer - Up To 20' Long - Tan # 290-74840. This will match the shape of you Micro Minnie much better and the heavy-duty, 4-layer polypropylene fabric offers good UV damage, dust, and weather protection when storing your camper. The only downside to this cover is that there are no access ports for doors, so once its on, you will need to remove it to gain access to the camper.

If you wanted something that will still allow access when the camper is stored, I recommend the Classic Accessories PolyPro III Deluxe Travel Trailer Cover - Model 1 up to 20' RVs Grey # 052963731637. This is a little more expensive, but the PolyPro III Fabric offers even better resistance to UV damage, dust, and the weather.

expert reply by: Lazer S

0

Answer 1

An equalizing hitch or weight distribution can sometimes increase the capacity of the receiver hitch, but the vehicle manufacturers stated towing capacity or rating will always be the final determination of how much the vehicle can tow. Any towing…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 4

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 7

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 8

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 9

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 10

In regards to the Correct Track Trailer Alignment and Lift Kit part #RR23QX, the kit provides a lift by essentially extending the hangers. This normally requires cutting off the old hangers and welding on new, taller ones but with this kit you…

view full answer...

Answer 11

The Correct Track Trailer Alignment and Lift Kit - Tandem Axle #RR23QX does come with all of the components needed to lift a tandem axle trailer. The center hangers of a tandem axle setup use different components than the front and rear hangers since…

view full answer...

Answer 12

The Correct Track Trailer Alignment and Lift Kit part #RR23QX offers a 1-1/4" or 2-1/4"lift so if the hitch height height is lower than the vehicle hitch height you can use this kit to bring the trailer level with the vehicle and eliminate…

view full answer...

Recommended Storage Cover for a 2021 Winnebago Micro Minnie 1700 FB

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching